Upgrade to SYNC 3.4!

[SM105K]

Definitely the rhinestones, and I suspect cowboy boots as well.


Sent from my iPhone using Tapatalk

Haha, I enjoy some Glen Campbell, and I do not own a pair of cowboy boots. The majority of the time my feet resident in Dansko's or flip flops.

However, I should have took Toby Keith's advice and "I should have been a cowboy".

 

[FiveLeeter918]

Why does the speed (40), look weird?

Mine looks like the signs on the side of the road.

Is that not a NA map or are you driving in Europe?

Its for NAV in Motion. Since it's technically illegal here I may or may not have switched to the European logic in order to disable it haha

 

[Michigan-SHO]

Haha, I enjoy some Glen Campbell, and I do not own a pair of cowboy boots. The majority of the time my feet resident in Dansko's or flip flops.

However, I should have took Toby Keith's advice and "I should have been a cowboy".

You workout barefoot? I know a lot of lifters do


Sent from my iPhone using Tapatalk

 

[SM105K]

Is that because of the bedazzled manthong or because he's from Arizona?

It is a posing thong.....

 

[SM105K]

You workout barefoot? I know a lot of lifters do


Sent from my iPhone using Tapatalk

Nope, mostly in Chucks.

 

[Michigan-SHO]

Nope, mostly in Chucks.

Makes sense, nice flat base with no cushion


Sent from my iPhone using Tapatalk

 

[SHOthyme]

Its for NAV in Motion. Since it's technically illegal here I may or may not have switched to the European logic in order to disable it haha

Dang it, why couldn't you just say you were on the Autobahn?

Now I want it and I don't even know what it is!!!!

 

[SHOthyme]

Scratch that, just looked it up, probably better if I don't have the ability to tinker with it while the vehicle is moving.

 

[Joshw0000]

Scratch that, just looked it up, probably better if I don't have the ability to tinker with it while the vehicle is moving.

I googled it too, lol. Looks like a plug can be purchased for a couple hundred bucks to allow it. I did a little hackery on my truck (aftermarket radio) and installed a grounded switch so I could access some features while it's moving. It basically just tricks the unit into thinking you've pulled the ebrake. I'm sure that plug is doing something similar.

Sent from my SM-N960U using Tapatalk

 

[FiveLeeter918]

I googled it too, lol. Looks like a plug can be purchased for a couple hundred bucks to allow it. I did a little hackery on my truck (aftermarket radio) and installed a grounded switch so I could access some features while it's moving. It basically just tricks the unit into thinking you've pulled the ebrake. I'm sure that plug is doing something similar.

Sent from my SM-N960U using Tapatalk

Forscan is free though.

 

[Joshw0000]

Forscan is free though.

I tried it once to get rid of Sirius from my stereo and it wouldn't work with my ELM327 OBD2 (cheapo eBay) bluetooth dongle. I tried the free app and a patched (err, try-before-you-buy) premium app. I know the dongle is good. I've used it to check/clear codes on a few vehicles with Torque Pro. But I guess the app just didn't like my dongle.

Forscan's site recommends a $100 OBDLink on Amazon. Which one do you use?

Sent from my SM-N960U using Tapatalk

 

[FiveLeeter918]

You need one capable if MS-CAN, most Elms can't do that.

I have this one, its worked flawlessly for 3 years on multiple vehicles.

https://www.amazon.com/VINT-TT55502...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[Michigan-SHO]

Did the update last night, didn’t go so well.

2016 SHO original SYNC 3.0 with navigation.

First, let me say the video and directions were spot on and I had Zero issues with this part.

However, I forgot to click the navigation box during the install process so right note I have no navigation. This should be fixed today when I download the correct files with the navigation

Problem number two, my USB ports in my center console no longer work, the error code says they are not supported. Further inspection reveals later 2016 models and up have a different USB port that supports Android auto and Apple car play.

Lastly, my clock is now 4 hours ahead and I cannot change it. I can move the numbers but in about five seconds the time blinks back to what it was before.

Good times....


Sent from my iPhone using Tapatalk

 

[SM105K]

You need one capable if MS-CAN, most Elms can't do that.

I have this one, its worked flawlessly for 3 years on multiple vehicles.

https://www.amazon.com/VINT-TT55502...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

That is exactly the one I have as well.

 

[FiveLeeter918]

Did the update last night, didn’t go so well.

2016 SHO original SYNC 3.0 with navigation.

First, let me say the video and directions were spot on and I had Zero issues with this part.

However, I forgot to click the navigation box during the install process so right note I have no navigation. This should be fixed today when I download the correct files with the navigation

Problem number two, my USB ports in my center console no longer work, the error code says they are not supported. Further inspection reveals later 2016 models and up have a different USB port that supports Android auto and Apple car play.

Lastly, my clock is now 4 hours ahead and I cannot change it. I can move the numbers but in about five seconds the time blinks back to what it was before.

Good times....


Sent from my iPhone using Tapatalk

yea unfortunately you'll need to upgrade those for the update. I should've specified.

you'll need these.

https://www.tascaparts.com/oem-parts/ford-transceiver-gj7z19a387b

https://www.tascaparts.com/oem-parts/ford-control-module-bezel-gc3z19c149a

 

[Michigan-SHO]

yea unfortunately you'll need to upgrade those for the update. I should've specified.

you'll need these.

https://www.tascaparts.com/oem-parts/ford-transceiver-gj7z19a387b

https://www.tascaparts.com/oem-parts/ford-control-module-bezel-gc3z19c149a

Thank you


Sent from my iPhone using Tapatalk

 

[SHOthyme]

yea unfortunately you'll need to upgrade those for the update. I should've specified.

you'll need these.

https://www.tascaparts.com/oem-parts/ford-transceiver-gj7z19a387b

https://www.tascaparts.com/oem-parts/ford-control-module-bezel-gc3z19c149a

Interesting, I have an 18 and everything works as expected, even the android auto.

Like I tell my kids, sometimes it's better to be lucky than good!

 

[High on Ethanol]

Completed this upgrade this morning, it took about 40min total. Everything works.

 

[Michigan-SHO]

Completed this upgrade this morning, it took about 40min total. Everything works.

2018 F150 right?


Sent from my iPhone using Tapatalk

 

[High on Ethanol]

2018 F150 right?


Sent from my iPhone using Tapatalk

Yessir, definitely like the all blue theme. The one thing I really want....is the volume to go 0-100