STILL WONT FIRE AFTER REPLACING CPS

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MATT HOWARD

New Member
Joined
Apr 4, 2003
Messages
32
Reaction score
0
Location
ST. LOUIS
WELL HERES MY PROBLEM, I HAVE A 93 ATX SHO W?125,000 MILES, AND ONE DAY DRIVING DOWN THE ROAD IT QUIT ON ME, I FOUND OUT IT WAS GETTING FUEL BUT NOT SPARKING, SO I CHANGED THE PLUGS, PLUG WIRES AND THE COIL PACK, STILL NO SPARK, SO I THEN CHANGED THE CPS SENSOR, TIMING BELT, AND WATER PUMP WHICH WAS LEAKING AND STILL NO SPARK, ANY HELP ON THIS TOPIC WOULD BE GREAT.
 

twr

whoohoo
Joined
Aug 23, 2001
Messages
2,131
Reaction score
44
Location
half-way there, I think.
It's possible the the CCRM or IRCM (depending on the year) has gone bad - It supplies power to the PCM. Are you getting a CEL?? any codes??
 

projectSHO89

SHOless In St L
Joined
Nov 7, 2001
Messages
6,116
Reaction score
160
Location
St. Louis, MO
As a courtesy to all, please do not use all CAPS. It is considered SHOUTING.

Since there is fuel pressure, the PCM should be getting power.

As for no spark possibilites: Coil pack, DIS module, CPS, wiring faults all come to mind.

Steve
 

projectSHO89

SHOless In St L
Joined
Nov 7, 2001
Messages
6,116
Reaction score
160
Location
St. Louis, MO
Neither code will cause a "No Spark" condition.

Continue focusing on the previous list of possibilites for attention.

Steve
 

Latest posts

Forum statistics

Threads
107,080
Messages
1,181,222
Members
16,144
Latest member
14blkbeauty

Members online

Back
Top