BaySHO Performance
Latest activity Postings About
-
-
BaySHO Performance replied to the thread 1992 SHO clutch replacement.Flywheel thickness is 1.186" new. Minimum thickness 1.141". When the flywheel is resurfaced on a Blanchard grinder, it takes around 12... -
BaySHO Performance replied to the thread Intermittent Engine Tap/Knock. Video Link..Stethoscope on the intake and around there, and on the oil pan for the rod bearing. I would have thought a rod bearing would be...
-
BaySHO Performance replied to the thread Intermittent Engine Tap/Knock. Video Link..Best to use a stethoscope or long bladed screwdriver with your ear to the handle to pinpoint where it's coming from. The only knock I've...
-
BaySHO Performance replied to the thread 1992 SHO clutch replacement.Wiki SHO is your friend.... http://wiki.wikisho.com/wiki/Engine_Support_Beam http://wiki.wikisho.com/wiki/Clutch_R%26R_Procedure
-
BaySHO Performance replied to the thread Issue starting and stall at high rpm.Ouch. When a cat lets go on the engine side pieces can get sucked back into the engine, scoring the cylinder walls beyond repair. Looks...
-
-
BaySHO Performance replied to the thread Increase tire width on stock rims?.Like Chad, I also use 225/55s. Fine fit, no fender problems, better grip because of the increased footprint.
-
BaySHO Performance replied to the thread Increase tire width on stock rims?.The usual upgrade is 225/55. Download this file to see all your choices and their effect on speedometer accuracy. Download arrow top...
-
BaySHO Performance replied to the thread Issue starting and stall at high rpm.I second pulling codes. Very few of them cause the CEL to come on. You will find lots of useful info here as well as code checks...
-
BaySHO Performance replied to the thread Proud owner of 1989 SHO in Socal.Don't forget you will need to redo the differential bearing preload with a different shim if installing a Quaife...
-
BaySHO Performance reacted to Jacobvarnum's post in the thread Does this sound like a crank sensor? with
Like.
And thank you to everyone! yeah I checked it at the plug and it wasn’t sending any signals. I’ll let you know tomorrow if I’m able to... -
BaySHO Performance replied to the thread Does this sound like a crank sensor?.Hopefully that was it. The gap between it and the vane (30 thou) may have been off and it wasn't sending a signal. But I suggest...
-
BaySHO Performance replied to the thread Where is my 1990 under hood fuse box?.Thank you! I have another thread on here with my main problem, I’ll link it and see if you know anything about my problem Just twigged...
-
BaySHO Performance replied to the thread Does this sound like a crank sensor?.OK, Gen 1. Let's make sure you got the whole sequence for a KOEO. You should have got 11 twice in succession, then a 1 signifying the...
-
BaySHO Performance replied to the thread Where is my 1990 under hood fuse box?.There is no Ignition Control 10A fuse on gen1s. From the '90 EVTM: I assume that you have a problem with the ignition circuit to be...
-
-
BaySHO Performance replied to the thread Does this sound like a crank sensor?.Something up with the clutch cable for sure, but if the car cranks with the pedal to the floor and it still won't start, it's nothing to...
-
-
Loading…
-
Loading…
