Sarcs?

[shojoe1997]

Im sorry if this has been talked about before but i want to know what happens if you put lowering springs on a gen3 SHO with the SARCS still in. Is it bouncy/jittery, or boatish. Also ive heard about disabling the struts or something like that, what does that do to the ride?

Thanks
Joe

 

[jimtash]

Not sure about using lowering springs with SARC's but there's an alternative to lower the car with the OEM springs.

http://www.v8sho.com/SHO/LoweringInstructions.htm

Here's the switch to disable the SARC's. This turns the struts to full hard all the time.

http://www.v8sho.com/SHO/sarc.html

 

[shojoe1997]

Do you know how much that lowers the car?

 

[jimtash]

No, but here are pics of how it looks.

http://www.v8sho.com/SHO/JasonsLoweredSHO.htm

 

[stephen newberg]

From the photos it might be down an inch.

pax, smn

 

[shojoe1997]

I read the thing explaining how to do it but i dont get it. What are you doing pushing the strut up? Has anyone else done it?

 

[jimtash]

A new pinch bolt hole in the strut tab is opened up so when installed, the bolt goes through it instead of the original. Relocating the hole above the original lowers the strut housing in the knuckle.