Pully bearings OEM only?

[BIGSHOMIKE]

Thats what I am being told here locally, and that means they can't get any. And ford will only sell the whole pulley.

Anyone have a part# aftermarket?

It's for the lower idler pully ATX.

Thanks

 

[jelloslug]

If I could get my hands on one I could look it up in my big book-o'-bearings. I tried to look up the number before and got nowhere. I'll stick it on the Cordax here and measure it to be sure what size it is and find a suitable replacement.

 

[BIGSHOMIKE]

Hey thanks man.

The number on the pully is

35BD219DUK

if that helps. Also says NSK, I assume thats the japanese manufacterer.

 

[Off Road SHO]

One of the 6 SHO Buggy owners in the Phoenix area is using idlers from a Chevy truck on his 3.2. He gave me a couple of spares. If you get the measurements, post them and I'll see if these will work.

Tom

<small>[ July 02, 2003, 06:55 PM: Message edited by: Off Road SHO ]</small>

 

[SHOZ123]

Gen 3 idler pulleys will work.

 

[aaronsbiza]

Where can you buy the bearing?

 

[jelloslug]

NSK is a bearing manufacturer (we buy from them) but that number is not a standard bearing number, it doesn not cross referance to anything (I looked a while back). If someone could send me a bearing I can find one that will work.

 

[BIGSHOMIKE]

Ford says 112 bucks and they don't have any.

According to them there is one on the 3.0 that is the same, but I can't see what they are meaning on my 3.0. They say they gen 3 won't work.

Does anyone have the part# for the gen 3, so I can just ask for it specifically?

Jelloslug,when I find one for my car I will give you my old one so everyone can just buy the bearing from now on.

Thanks for your help.

 

[jelloslug]

Thanks man, with parts disappering the way they are, finding an alternitive for anything is good.

 

[BIGSHOMIKE]

Found it.

NSK part, $28.50, be here Wed. I don't know the part number, I got it here.

Kaman Industrial Technologies
Nate Eden
801-225-5477

 

[BIGSHOMIKE]

I got the new one and installed it.

It is an NSK bearing also,

Part# 35BD219T12VVCG33

 

[SHOZ123]

BIGSHOMIKE:
Ford says 112 bucks and they don't have any.

According to them there is one on the 3.0 that is the same, but I can't see what they are meaning on my 3.0. They say they gen 3 won't work.

Did they say why? The bearing is the exact same as in the 3.0L pulleys. I have mounted them on my 3.0L spare motor and I cannot see why they wouldn't work, same diameter.

I had a part number but when a member got that number he came up with the tensioner pulley. Ask FordPartsNetwork.

 

[seth'sSHO]

Bigshomike, Does that company have a web site? I need the bearings for both pulleys. frown

 

[BIGSHOMIKE]

Yes they do

www.kamandirect.com

I don't take fords word for much unless the guy knows SHO's, I'd rather just ask here but for 35 bucks after shipping and tax it's still cheaper than a new pulley anyway, and they can get the other ones if I need them as well.

I am also sending my old bearing to Jelloslug and he's going to look it over as well.