Issue with tune

[DrunkR0B0T]

Installed a tune from ortiz. Ran great. After I shut down the car and started it back up it seemed to run like it had when I mistakenly put the 3bar map sensor on with no tune. Struggling to push past 30 mph horribly shaking. Did the tune not stick, is that possible? Installed the tune on an sct x4.

 

[DrunkR0B0T]

Keep getting a p0106 on the tuner.

 

[tgabtg]

P0106 MAP SENSOR

Let me backtrack a couple of days. Went in for state safety inspection and failed emissions...................."System not ready for testing" I figures like last year it was related to the LMS tune. Here is what I have done so far...... 1. Removed 4 bar MAP sensor and R/R with OEM sensor 2...

shoforum.com

¯\_(ツ)_/¯

 

[DrunkR0B0T]

yea ill check the connection and pins I think it is an issue with the learning software of the car. I don't think it is the sensor itself but the car fighting the sensor.

 

[Thormx]

Did you replace the correct MAP Sensor?

I just loaded my tune and have a P0106 code, what do I do?

So you're excited, you just got your new tune installed, your parts are loaded, and you turn on the car, only to find subpar drivability and a Check Engine Light (CEL). You pull codes and you see the following:Now What?! The P0106 trouble code is a map sensor mismatch, meaning the signal the...

www.ortizperformance.com

 

[DrunkR0B0T]

Did you replace the correct MAP Sensor?

I just loaded my tune and have a P0106 code, what do I do?

So you're excited, you just got your new tune installed, your parts are loaded, and you turn on the car, only to find subpar drivability and a Check Engine Light (CEL). You pull codes and you see the following:Now What?! The P0106 trouble code is a map sensor mismatch, meaning the signal the...

www.ortizperformance.com

Yea I did all this correctly. Thanks tho. I'm going to contact ortiz.

 

[DrunkR0B0T]

So i drained the capacitors in the PCM and it seemed to do the trick. Like i thought it was the computer still holding on to old setting that were making it flip out. Will update in a few days with progress for anyone else having this issue. Here is a link to what i did.