intermitent radio

[SLOSHO89]

My radio only works for a few minutes. Then it will stop. Any ideas? The tape deck always works.

------------------
Oxford White '89 SHO
Slicers, SHO+ hood and spoiler, Met.-Red and Gold Intake.

 

[jimbobzsho]

MAN THAT MOTOR IS SWEET

 

[OzzmanNT]

I'm assuming the stock radio correct? (since you said tape deck) Is it just the speakers that go out or everything (like the lights on the face) and does it work again after a while? Still Probally just a short somewhere, either that or it's time for a new radio

Ohh and schweet engine painting job....come do mine next please.

------------------
1998 Burgandy SHO (Tan/Mocha leather)
K&N panel filter
Mobil 1 5W-30 Synthetic Oil
Cool Blue headlights (much brighter than stock and look much better)
OBD-II diagnostic Module (this thing is schweet)
Installing ride control switch soon
Upcoming Mods:
-Borla Exhaust (working with a local muffler shop on this)
-Paint brake capilers (or polish them)
-Colgan Bra
-SHO lettering on the doors
-Upgrade intake system
-and probally a few more as I think of them.
OzzmanNT( mailto[email protected][email protected]</A> AIM: OzzmanSHO)

[This message has been edited by OzzmanNT (edited 10-26-2001).]

 

[SLOSHO89]

Originally posted by OzzmanNT:
Ohh and schweet engine painting job....come do mine next please.

Stock radio.
It is just the speakes (all of them....no sound). But if I push in a tape, the tape will work fine. If I pull out the tape it still doesn't work.

Send me your intake and I'll do it for a small fee

------------------
Oxford White '89 SHO
Slicers, SHO+ hood and spoiler, Met.-Red and Gold Intake.

 

[centaurus3200]

hey effren,

get an in dash cd player. the fomoco stuff always breaks and the preamp section sucks. i've always had great experiences with Alpine. mine is 6 years old and never misses a beat.

my friend pierre (who also went to cal poly like myself) has a 10 year old 6 disc cd changer with matching deck in his 1978 Porsche 911SC. the friggen car even had a windshield leak and flooded the cockpit during a rain storm. the changer was under the seat and got soaked. and it still works ike a champ.

see ya,
Robby

------------------
92 SHO MTX
silver on gray with all options
kyb struts
sho shop motor mounts
edelbrock RPM exhaust with 3.5" beveled chrome tips
Alpine CDM-7824 deck
all work performed by Sho Shop and Shonut
Shonut rebuilt tranny with new clutch and boy does it feel good.

 

[OzzmanNT]

The intake is in the mail!

Yeah that's it. Did you use powdercoating or what? (the outside part the not red part) I've done polishing before....even have a good secret to make that go faster...muahhaha

------------------
1998 Burgandy SHO (Tan/Mocha leather)
K&N panel filter
Mobil 1 5W-30 Synthetic Oil
Cool Blue headlights (much brighter than stock and look much better)
OBD-II diagnostic Module (this thing is schweet)
Installing ride control switch soon
Upcoming Mods:
-Borla Exhaust (working with a local muffler shop on this)
-Paint brake capilers (or polish them)
-Colgan Bra
-SHO lettering on the doors
-Upgrade intake system
-and probally a few more as I think of them.
OzzmanNT( mailto[email protected][email protected]</A> AIM: OzzmanSHO)

 

[SLOSHO89]

Well what I did was I bead blasted every thing (except the secondarys). Then painted the top of every thing silver w/ brand X, so that I would have an even base (it was a little oxidzed B4). Then used dupont touch up paint (Lt. Champane and Cherry red). It came out semi-gloss ,thank god. No powder coating...to much money. Total cost was under $20.00

It look like it will hold up just fine too.

------------------
Oxford White '89 SHO
Slicers, SHO+ hood and spoiler, Met.-Red and Gold Intake.

Web Page www.geocities.com/web_page66/