How Much Do I Tourque down a Lower Idler Pulley

[aaronsbiza]

Does anyone have the Tourque specs for a 95ATX for the Lower Idler Pulley Bolt?

 

[DJ SHO]

Enough so it doesn't come loose.

 

[Slo-Sho]

Well you don't want to "He-Man" the thing on there. boink

 

[projectSHO89]

Lower Accessory Drive Idler Pulley Bolt (3.2L Only) 36-55 n-M 27-41 lb-ft

Steve

<small>[ July 09, 2003, 01:49 PM: Message edited by: projectSHO89 ]</small>

 

[aaronsbiza]

Thanks projectsho

 

[rangerj]

Aaron,

Consider replacing the nut with a lock nut. Torque it to about the middle of the range.

This would be a good time to remove the pulley mount, clean the threads on the jack screw, and put some anti-sieze compound on the jack screw. It makes adjusting the tensioner a lot easier. rangerj