Carl's SHO
New Member
I haven't had any issues but I didn't buy dual led bulbs. I just use amber.
Sent from my VS500 using Tapatalk
Ah, ok thanks.
Sent from my iPhone using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I haven't had any issues but I didn't buy dual led bulbs. I just use amber.
Sent from my VS500 using Tapatalk
Hi, just curious if you’ve checked/looked at your led bulbs flashing for a while to see if they are consistently flashing correctly.
I changed 726-13-01 to all zeros but -14- was already all zeros. The hyperflash goes away but the bulbs do not flash normally, consistently. They will flash fine a couple times and then they’ll kind of flicker. Occasionally the right side will actually change from amber to white mid-flash if my parking lights are on.
I don’t expect you to check yours now but if you do, make sure the vehicle is running and in drive. In drive is when mine have the most issues.
Sent from my iPhone using Tapatalk
Yes mine flash correctly after entering the codes. They work correctly on all modes.
Sent from my iPhone using Tapatalk
Forgot to mention, mine are single mode
Sent from my iPhone using Tapatalk
No that is a firmware limitation that forscan cannot change. I believe 2013 is the only year Taurus that has this.Is there any way to get the Climate controls on the RH screen in the cluster? My wife's explorer has this, but missing in the SHO.
Never looked into this but I would guess you can since the interceptors do not have leds for the outboard lights. The Fusions have done this, not sure if you can accomplish what you set out to do though but try searching for fusion forums for a clue where to start.I have Forscan and made some changes to my car but does anyone know if we can "configure," our tail lights? I know you can on the Fusion. I also changed my Audi tails with coding. I thought it would be cool to mess around with them - not sure I ever liked the "rectangle," look.
I'm pretty sure the police interceptors just use the 09-12 tail lights that used conventional bulbs. Must be a maintenance cost thing for fleet service vehicles. Replacing a burned out LED with the whole housing and lens is way more expensive than a replacement 3157 bulb.Never looked into this but I would guess you can since the interceptors do not have leds for the outboard lights. The Fusions have done this, not sure if you can accomplish what you set out to do though but try searching for fusion forums for a clue where to start.
The interceptors are all red no clear like both the standard 2010-12 and 2013+.I'm pretty sure the police interceptors just use the 09-12 tail lights that used conventional bulbs. Must be a maintenance cost thing for fleet service vehicles. Replacing a burned out LED with the whole housing and lens is way more expensive than a replacement 3157 bulb.
No, firmware limitation same as the climate screen.Anyone know if you can add a digital speedometer using Forscan to 2013+ models Taurus/MKS like in the YouTube video below...?
I have recovered a copy of the "2010-2019 Taurus As-Built Data Modification.xlsx" spreadsheet from an old backup. Forum Administrator: Is it okay for me to post a link to this?
Please post the link.I have recovered a copy of the "2010-2019 Taurus As-Built Data Modification.xlsx" spreadsheet from an old backup. Forum Administrator: Is it okay for me to post a link to this?