Timing Question's

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

!vtec-this!

New Member
Joined
Mar 27, 2007
Messages
8
Reaction score
0
Location
Rhode Island
Well I bought this car a few week's ago it’s a 91 mocha 5spd. When I got it was only runnin on 5 cyl.:bonk: so I replaced the plugs & wires and now it runs a lot better BUT when u punch from an idle it hesitates for a second then revs up.

So my questions are….(Bear w/ me here iam new to the SHO's and haven’t done much research) Is their any way of adjusting the timing w/ out the computer compensating for adjustment? And would a bad crank sensor or cam sensor cause this problem? And lastly is any adjustment to these senor's?
 
Last edited:

SASHO91

Zoom Zoom
Joined
Feb 3, 2004
Messages
6,990
Reaction score
141
Location
San Antonio,TX
I'd pull the codes first.
http://www.shophoenixproject.com/

There are no "adjustments" for the CPS(<just for installation), CID, or TPS.

Sounds like your MAF could use a cleaning, as well as some new O2's. But, before we get into that, pull the codes. :thumb:

EDIT: That MX-3 is very nice :salute: ! I love that KLZ roar too :dribble: . You mind posting your mods?
 
Last edited:

SASHO91

Zoom Zoom
Joined
Feb 3, 2004
Messages
6,990
Reaction score
141
Location
San Antonio,TX
A dirty MAF will not always trip a CEL. But a dirty MAF will hinder performance.

The O2's, they should trip a CEL, but if they are old, then they are not going to preform well.
 

!vtec-this!

New Member
Joined
Mar 27, 2007
Messages
8
Reaction score
0
Location
Rhode Island
SASHO91 said:
EDIT: That MX-3 is very nice :salute: ! I love that KLZ roar too :dribble: . You mind posting your mods?

These are the mods that where done when the vid was made:

Motor

-2.5 KLZE
-millenia IM
-J-spec ECU
-SS Autochrome headers w/test pipe
-unorthodox UDP
-ACT stage1 clutch
-findenza alum. flywheel
-custom 2.5'' exhaust w/cheap fartpipe

Suspension+breaks

-Intrax 2.75" lowering springs
-Corksport front+rear strut tower braces
-SRD polyurathain lower control arm bushings
-KVR crossed drilled rotors front+rear
-17" konig trouble 5 star wheels

Appearence mods

-all red taillights
-"Blackedout" headlights+turn signal housings
-10,000k H.I.D. kit
-red strobe light kit in headlights
-all black headliner+plastics




Right now the heads are being rebuilt due to drpoing a valve:oogle: .
A port & polish job is also being done along w/ a mild set of sreet cams:naughty:
 

!vtec-this!

New Member
Joined
Mar 27, 2007
Messages
8
Reaction score
0
Location
Rhode Island
Thanks,

but I just ran the car for a bit and no cel. And i forgot to add that i belive its runnin rich aslo because the exhaust fumes really stink wich would also be from what u stated MAF & O2's correct?
 

SASHO91

Zoom Zoom
Joined
Feb 3, 2004
Messages
6,990
Reaction score
141
Location
San Antonio,TX
Have you pulled the codes yet? (even though there is no CEL, there still can be codes)
The link I provided has the process to pull them.
 

Latest posts

Forum statistics

Threads
107,080
Messages
1,181,222
Members
16,144
Latest member
14blkbeauty

Members online

Back
Top