So what did you do to your SHO today!?

[Ecoboost_xsport]

So I figured out the connector part, didn't realize the hose was threaded on both ends and I could remove the one side. So the adapter listed in Ecoboost_xsport's build log is all I needed.

Also I have seen this stuff floating around on the FB groups. I'm not sure I'd get super excited yet as it's more just hey look what we might build, but if either comes to fruition it could be pretty sweet.

First up is a Wavetrac LSD for the front

https://m.facebook.com/groups/ecoboostperformance/permalink/3321543634614653/?fs=1&focus_composer=0&refid=8&_ft_=qid.6948501313032555437:mf_story_key.3324087813482904910:group_id.844028735699501:top_level_post_id.3321543634614653age_id.844028735699501:src.22hoto_id.5457188471020034:story_location.5:view_time.1617824033:filter.h_nor:tds_flgs.3tt.AX_Cr8GTQg_2L_ZU&__tn__=S*W-R

https://m.facebook.com/groups/693811557459264/permalink/1788440707996338/?fs=1&focus_composer=0&refid=8&_ft_=qid.6948501313032555437:mf_story_key.3324087813482904910:group_id.844028735699501:top_level_post_id.3321543634614653age_id.844028735699501:src.22hoto_id.5457188471020034:story_location.5:view_time.1617824033:filter.h_nor:tds_flgs.3tt.AX_Cr8GTQg_2L_ZU&__tn__=S*W-R

Next up is a rear lsd and hybrid viscous coupler

https://m.facebook.com/groups/693811557459264/permalink/1774748856032190/?_rdr

Yup Adam with the world record Flex got that WaveTrac thing started. Last I head, @FiveLeeter918 picked up the baton on this.

As for the RDU thing, Steve from AKD has that thing going. He's working with Colin and his Edge in this project, but I firmly believe he needs to test this out on a SHO platform. Called him to mention this and looks like he reached out on some FB groups. He's looking for input on PTU stuff (big ups to @Caden for sending his own PTU to him to get this ball rolling), so hit him up to see what you'd like to see on your dream sheet for a PTU. I mentioned, case brace (another thing @Caden stepped up with...reaching out to MountTune and passing the torch to @FiveLeeter918 ), better drain plug setup, dual top fittings (vent separate from fill), maybe even billetncase with larger fluid capacity and switch to a Timkin/Torrington idler gear bearing...

 

[fordfanstan]

I mentioned, case brace, better drain plug setup, dual top fittings (vent separate from fill), maybe even billetncase with larger fluid capacity and switch to a Timkin/Torrington idler gear bearing...

Maybe a girdle?

 

[Ecoboost_xsport]

Maybe a girdle?

Yes, a brace or girdle...girdle might be tough with the limited space available back there.

 

[SM105K]

I stared at mine in the garage, and actually thought about removing the front clip. Then I thought, nah.

 

[Ecoboost_xsport]

I stared at mine in the garage, and actually thought about removing the front clip. Then I thought, nah.

It's kind of where I'm at with it these days as well...

 

[SM105K]

Yeah...I am annoyed every time I open the garage door.

 

[Ecoboost_xsport]

Yeah...I am annoyed every time I open the garage door.

View attachment 18470

oooppphhh....

 

[Wsho]

Yeah...I am annoyed every time I open the garage door.

View attachment 18470

What the **** happened? What'd I miss...
I thought I was having a bad day

 

[Wsho]

So I was going to have my shocks and struts redone today now for the 2 week got blown off. At another shop supposed to get everything done to the turbo tubes pods installed and the other thing and blow me off for 2 months getting f**king aggravated... since I got the car out of the shop January 1st I literally have not done anything to the motor and all the intake tubes components that supposed to be put on cuz everybody keeps blowing me off.. The exhaust shops around here are real leery about installing my downpipes. Welcome to f**king California I'm about to say goodbye to California. I will literally drive across the country to a shop that will work on my car at a reasonable price hit me up if you know a good mechanic..

 

[Jordan_R]

So I was going to have my shocks and struts redone today now for the 2 week got blown off. At another shop supposed to get everything done to the turbo tubes pods installed and the other thing and blow me off for 2 months getting f**king aggravated... since I got the car out of the shop January 1st I literally have not done anything to the motor and all the intake tubes components that supposed to be put on cuz everybody keeps blowing me off.. The exhaust shops around here are real leery about installing my downpipes. Welcome to f**king California I'm about to say goodbye to California. I will literally drive across the country to a shop that will work on my car at a reasonable price hit me up if you know a good mechanic..

Well hello from Missouri. I offered @FiveLeeter918 to do his turbos so I will offer my services to you for your downpipes/struts LOL

 

[Bronco2fan]

Yeah...I am annoyed every time I open the garage door.

View attachment 18470

That's a shame. I really like how badass that makes the car look. But that's also the main reason I didn't get one. My SHO drags the lip every time I back out of my drive, no matter what angle I take. Also why I haven't lowered her yet. Hope you get it fixed.

 

[DadMobile]

Well hello from Missouri. I offered @FiveLeeter918 to do his turbos so I will offer my services to you for your downpipes/struts LOL

In a few months I’m going to fly ya down to Texas help drop my motor in, unless you have one for sale now

 

[FiveLeeter918]

In a few months I’m going to fly ya down to Texas help drop my motor in, unless you have one for sale now

Sounds like we need a tech day!

 

[Jordan_R]

In a few months I’m going to fly ya down to Texas help drop my motor in, unless you have one for sale now

I've heard crazier things come to fruition than that so who knows lol and I got another motor with a bendy rod that was can drop in there for sure!

 

[FiveLeeter918]

Decided to install my XDI-60 this weekend along with changing out plugs.

When I pulled the XDI-35 I found the square ring between the plate and the valve cover adapter was fubared.

Got it swapped our and my fuel trim issue seems to have greatly improved. 125 miles on the revision and so far it never goes over 12% where it was 22% at part throttle before. Also found that I'm holding 19.3 psi now where 17.6 psi was my max before. bonus!

Still got a small discrepancy on my fuel trims, but I could pass that off to the e50 fuel inconsistencies.

 

[Wsho]

Well hello from Missouri. I offered @FiveLeeter918 to do his turbos so I will offer my services to you for your downpipes/struts LOL

Well I might just be packing up the car in a couple weeks and head on out there with all my car parts LOL

 

[Jordan_R]

Well I might just be packing up the car in a couple weeks and head on out there with all my car parts LOL

Let me know lol money talks and I gotta build a sho

 

[Nova]

Let me know lol money talks and I gotta build a sho

And you can film it for your YouTube channel too!

Sent from my SM-G986U using Tapatalk

 

[Wsho]

And you can film it for your YouTube channel too!

Sent from my SM-G986U using Tapatalk

Oh that means it will be cheaper then.. Lol

 

[Nova]

Oh that means it will be cheaper then.. Lol

He should give you a cut for using your ride lol

Sent from my SM-G986U using Tapatalk