So what did you do to your SHO today!?

[SHO T1M3]

Raced an SRT8 Cherokee a little while ago... Short, empty highway run 40-100 before he needed to exit. He was definitely surprised to see my taillights the whole time!

Sent from my SM-G930T using Tapatalk

 

[Pintony]

just took some photos that is all...

 

[6500rpm]

just took some photos that is all...

Time to add a white one to complete the theme ( ;
USA, USA, USA, USA....

 

[gimpy]

Put the 700th mile on my 2016...

...yippie

 

[C2_SHO]

Hand wash and a sticker worth 5 hp!!!



Sent from my SM-G935V using Tapatalk

 

[Pintony]

Time to add a white one to complete the theme ( ;
USA, USA, USA, USA....

Maybe an INTERSEPTOR!!

 

[2012korn]

Oil change with amsoil and a k&n filter. And a wash and wax.

 

[marius883]

Oil change with amsoil and a k&n filter. And a wash and wax.

Spoke with Ford corporate who told me to go to a different dealer to get a second opinion on my vibration issue. Let's see what happens..

 

[Kelly Padfield]

Good luck!

Sent from my XT1097 using Tapatalk

 

[Sholab1]

Added the 170 degree from Torrie, I think I burped it properly. Fans kicking on at 212. Will be lower with tune.
Did it according to the post SHOdded either posted or quoted a thread posted back in 09/2014
http://www.ecoboostperformanceforum.com/index.php/topic,2280.msg56469.html#msg56469
I am going to let it sit to cool to see how it is. if all is fine with the burp. I will add the 3 bar Map.
Then I will add the 93 Octane 3bar tune and hope for the best.

 

[Kelly Padfield]

I just added my 170 degree thermo from Torrie today as well, plus got the 6510 NGK's gapped to .30 installed. Did some data logging this afternoon and I'm just waiting on a revision from Torrie.

 

[Sholab1]

Quick question this is the 3bar why only one bolt.? Are there not 2? Or am I wrong

Sent from my XT1254 using Tapatalk

 

[Sholab1]

Forgot photo



Sent from my XT1254 using Tapatalk

 

[StealBlueSho]

Depends on the year... I think 2010-2012 has two and the 2013+ had one.


Sent from my Nexus 6P using Tapatalk

 

[Kelly Padfield]

2013+ sensor has 2 holes but the manifold has only one threaded hole.

Sent from my XT1097 using Tapatalk

 

[bpd1151]

The bean counters at FMC, opted to do away with the two bolts found on the earlier model years, simply as a cost saving measure.

Sent from my SM-N920V using Tapatalk

 

[Kelly Padfield]

5 cents on a bolt goes a long ways when you sell how ever many thousands of units.

Sent from my XT1097 using Tapatalk

 

[bpd1151]

Yep. Thus why they formed a guide pin there, and did away with that extra 5 cents or so, per unit.

Sent from my SM-N920V using Tapatalk

 

[Sholab1]

Loaded and have to wait for wife to get home have to run to the store. 5 more min to try it. Then to pickup a t20 to keep on hand if ever need to remove it for warranty work.

Different question why does sync do maintenance afterwards? To save something for ford or just normal? Or is paranoid kicking in, lol

Sent from my XT1254 using Tapatalk

 

[SilverSH0]

5 cents on a bolt goes a long ways when you sell how ever many thousands of units.

Sent from my XT1097 using Tapatalk

Not only 5 cents a bolt but also install time. Think about installing that sensor with 2 bolts vs 1 bolt and a guide pin. With 2 bolts you have to put the sensor in the hole, manually line up the two holes, and then get one bolt started without moving the sensor. With 1 bolt and a guide pin you put the sensor in the hole, rotate until the pin slides into the hole, and everything is lined up. Then you're only installing 1 screw vs 2 so you also save time there. There's a pretty good savings with that simple change.