Pro*banshee
Active Member
Shit'll polish out.
Results in on current tranny failure!
- Thread starter somedude_001
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
pitaSHO
Why do I do this to myself?
A little JB weld...
SHO1
Coke Is It!
Silly putty should be good enough...
HotRodKid
mmmmm ... turbo
one of the responses on the "home forum" was simply "weld it"
YEA, that will work on a set of planetary gears, hahahaha
YEA, that will work on a set of planetary gears, hahahaha
SHO1
Coke Is It!
:laugh_ti: Good one! It kinda would work as you certainly wouldn't have to worry about breaking it again, since nothing would move anymore.
HotRodKid
mmmmm ... turbo
this just in:
tranny # 6 was found dead at 10:32pm. A note was found nearby, in which the tranny describes the horrible pressure it was feeling to perform, and its feelings of inadequacy. It committed suicide by knocking the turbo SHO off its jackstands. It was instantly crushed.
just playin
tranny # 6 was found dead at 10:32pm. A note was found nearby, in which the tranny describes the horrible pressure it was feeling to perform, and its feelings of inadequacy. It committed suicide by knocking the turbo SHO off its jackstands. It was instantly crushed.
just playin
SHO1
Coke Is It!
Only if no fluid is put back in, otherwise it prob won't hold.
n8rsk8r
Hey Where's my post?
so this was it huh? Was there anything different that you did with this one? Or just normal wear and tear?
somedude_001
SHO Member
bearing failure as far as i can tell. Nothing the turbo did.
somedude_001
SHO Member
negative. I will have my torque converter back early next week and hopefully get her running and tuned by that weekend... there will be video as always... why am I the only one that posts video of their boosted SHO?
BlackonBlack89
SHO Member
dont worry ill post vids when I run 12's........lol
somedude_001
SHO Member
you have a boosted/nitrous ATX?
BlackonBlack89
SHO Member
Nope.
Just some hoosiers.
Just some hoosiers.
somedude_001
SHO Member
should be wrapping it up tomorrow. Then me and hotrodkid will be getting a decent tune on it and we will beat the living **** out of it.
SHO1
Coke Is It!
Awesome hood prop. 2 in 1 Whatever works, right? save space and weight over carrying both.
jthod
Mr. Goodwrench
Mighty Putty. Problem solves by Billy Mayes himself.
SHOMurph
Ford B@stard
just curious if you are at full stock weight with this car?
somedude_001
SHO Member
oh this pig is full weight all the way.
I got it running today. sounds more bad ass then i remember. the tranny cooler lines are leaking a bit so tomorrow i'll take car of that then I will go to the DMV and get the registration renewed on it because it apparently expired in january.
after I checked the fluid levels I had to give it a couple of nasty revs to ummm make sure the turbo/BOV still works. I am happy to report that the turbo is still compressing air and the BOV is still obnoxious... I LOVE IT!
Similar threads
