Longtime SHO Owner that is FINALLY Starting to Mod It

SledDriver

Member
Joined
Sep 2, 2022
Messages
38
Reaction score
35
Location
Middletown, Maryland
CR uses brand new turbos if you choose that option, or they can use yours if you want to send them to Canada. We sell lots of them, and while they don't replace the wastegates they are tested and verified, and if bad they will replace them. I would recommend upgrading to TurboSmart wastegates though.

We have them on the site here:

No promo codes work for the Turbos, lol?
 

SeanDev

SHO Member
Joined
Jun 6, 2021
Messages
476
Reaction score
368
Location
46131
CR uses brand new turbos if you choose that option, or they can use yours if you want to send them to Canada. We sell lots of them, and while they don't replace the wastegates they are tested and verified, and if bad they will replace them. I would recommend upgrading to TurboSmart wastegates though.

We have them on the site here:

Oops, there rep who responded to my inquiry didn't mention I could go all knew, guess it's because I only brought up sending mine to them. TurboBay rep was so knowledgeable and educational, that's why I went with them. Good to have options, when there is so few for our platform. Now if I could just get her to behave before her build, it will make my year.
 

SeanDev

SHO Member
Joined
Jun 6, 2021
Messages
476
Reaction score
368
Location
46131
I believe we have a few sets of Gen3’s incoming soon. The Gen3’s are cheaper and better!
I wanted GH but out of stock, more than in stock, same for their intercooler. Not bashing GH at all, just how the game works. TurboBay turbos with treadstone intercooler is what I went with.
 

DadMobile

Worlds 3rd least slowest Ecoboost SHO
Joined
Nov 4, 2020
Messages
598
Reaction score
1,061
Location
Texas
Yah it’s been tough the last couple years with the supply chain issues and being a small business.

I remember when I bought my SHO in early 2019 (I wasn’t an employee at the time) everything but the fuel pump was in stock.

We are moving to a new location in October which is a turnkey “performance shop” with 4 lifts, dyno room, some offices, a place to do burnouts etc. We’ll have master mechanics on hand and we will be able to do anything from oil changes to custom big budget builds. Why I do bring this up? We had to wait 6 months for the last batch after we paid for them, that’s a ton of capital for a small business just have out lingering for 6 months.

As far as turbos go, those CR turbos only upgrade the turbine. We found a defect with the factory housings that everyone uses which leads the rear turbo to crack. Our current hold up has been been getting that upgraded part. We’d rather make less $$ than push out a product not up to our standard.
 

SeanDev

SHO Member
Joined
Jun 6, 2021
Messages
476
Reaction score
368
Location
46131
Yah it’s been tough the last couple years with the supply chain issues and being a small business.

I remember when I bought my SHO in early 2019 (I wasn’t an employee at the time) everything but the fuel pump was in stock.

We are moving to a new location in October which is a turnkey “performance shop” with 4 lifts, dyno room, some offices, a place to do burnouts etc. We’ll have master mechanics on hand and we will be able to do anything from oil changes to custom big budget builds. Why I do bring this up? We had to wait 6 months for the last batch after we paid for them, that’s a ton of capital for a small business just have out lingering for 6 months.

As far as turbos go, those CR turbos only upgrade the turbine. We found a defect with the factory housings that everyone uses which leads the rear turbo to crack. Our current hold up has been been getting that upgraded part. We’d rather make less $$ than push out a product not up to our standard.
Good for you. What defect affects rear turbo.?
 

SeanDev

SHO Member
Joined
Jun 6, 2021
Messages
476
Reaction score
368
Location
46131
I believe we have a few sets of Gen3’s incoming soon. The Gen3’s are cheaper and better!
Are they going to upgrade turbine with compressor side.? TurboBay improved both wheels so I can move TQ to midrange. Take the stress of GH pulling like a mule at take off. Me tqt coming on so low in my opinion just lead to more damage to engine and tranny, I can suffer a quick take off but as the vehicle moves faster those turbos should really kick in.
 

SledDriver

Member
Joined
Sep 2, 2022
Messages
38
Reaction score
35
Location
Middletown, Maryland
Just to update: @aaron240 has been tasked with building my front and rear LSD. This is going to be exciting.

I've pretty much ordered everything except for the GH Turbos. @DadMobile

I do plan on getting the manifolds ported and the turbos port matched. I have a solid machine shop around that I can discuss the work with, and see what I can do myself.
 
Top