SteedaSVT
New Member
My headrest won't go down in my 92 SHO... AHHHHH i have tried eerything i hate them up! anyone else have this problem... I would like to fix it otherwise im gonna sell it... lol it really annoys me
Headrest problems!!
- Thread starter SteedaSVT
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
iselltonsofthings
New Member
Same problem here. The drivers side will not go down. I've got so ****** that I slammed down on the thing and it still doesn't move. I've just gave up on it and left it where it is. It is cold and I don't feel like digging into it now. Maybe a summer project. madflame
SteedaSVT
New Member
Im to the point where i might just use a sawall and call it a day....Im seriously that ******
hey...mine too! Maybe they just don't go down?!?! My girlfriend drove my SHO and she is only 5'3"... her head was b/w the seat top and the headrest and drove her so crazy she pulled over and got out! rofl
Fortunately, it is perfect hight for me when it is flipped foward, so I wont worry until spring. pcorn
Fortunately, it is perfect hight for me when it is flipped foward, so I wont worry until spring. pcorn
SteedaSVT
New Member
Im just gonna trade it in!!
I think its time for my Lightning!
I think its time for my Lightning!
autobahnsho
SHO Victim
Did you read the owner's manual?? It's usually pathetic, except for infrequent things like this... rofl
CosmoSHO
New Member
The headrest shafts each have a series of machined grooves spaced along the length. On the inside of the seatback where the headrest shafts slide in (don't get too excited now), there is "hairpin" clip that seats in the grooves to hold the headrest in position.
It sounds like your pin is bent in.
You may be able to access the bad player from the base of the seat back, going up to the top.
I'm 6'4" and like the headrests all the way up; mine wouldn't stay up and it was a PITA to get those clips out and replaced. Be careful, the plastic sleeve the shaft fits in has a tendency to break under stress.
Cosmo
It sounds like your pin is bent in.
You may be able to access the bad player from the base of the seat back, going up to the top.
I'm 6'4" and like the headrests all the way up; mine wouldn't stay up and it was a PITA to get those clips out and replaced. Be careful, the plastic sleeve the shaft fits in has a tendency to break under stress.
Cosmo
I couldn't get either of mine to go down so I finally leaned the headrest forward so I could see the portion of the bars that bends at the top. This gave me a good surface to VERY gently tap with a dead blow hammer. It only took a couple of taps on each bar for each headrest and now both of mine are all the way back down against the seats. No more rattles - it's wonderful!
TimboSHO
Intermediate
SteedaSVT said:
You are going to sell the car for something that simple? C'mon... you own a SHO! There are tons of little annoying things that go wrong with mine all of the time!! There's always a solution to a problem no matter how easy or inconspicuous it is. Just hang in there! My passenger one is actually stuck up on my 89 as well...... :jpshakeh:
Similar threads
