EPP intake installed.

[CCXVI]

Intake is on, definitely worth the $450. You get what you pay for and this is way better made than the rest of them. **** easy install too, nothing complicated or frustrating about it.

Power seems a bit better, but the butt dyno can't really be trusted. Sounds pretty much the same as stock, except there's a little extra noise at part throttle.

 

[fordfanstan]

Looks great. Maybe someday I'll have the money.

 

[High on Ethanol]

Somebody needs to Dyno this. It's for science!!!!

 

[CCXVI]

Somebody needs to Dyno this. It's for science!!!!

I mean, there have been a few already.

https://i.imgur.com/4FGTEF0.jpg

This was stock tuning, just the intake.

https://i.imgur.com/YgdCjoW.jpg

This was a modded car. The big gains are on the top end.

 

[High on Ethanol]

I mean, there have been a few already.

https://i.imgur.com/4FGTEF0.jpg

This was stock tuning, just the intake.

https://i.imgur.com/YgdCjoW.jpg

This was a modded car. The big gains are on the top end.

Thanks for sharing. Hadn't seen these before. They should advertise it in the description. +5/+5 at the upper range.

Thanks again for the information.

 

[dinojc86]

Intake is on, definitely worth the $450. You get what you pay for and this is way better made than the rest of them. **** easy install too, nothing complicated or frustrating about it.

Power seems a bit better, but the butt dyno can't really be trusted. Sounds pretty much the same as stock, except there's a little extra noise at part throttle.

I installed the ECOPOWER Noise maker delete on the other side. I see you just have the stock tube but blocked.
I powdercoated REd and I saw this cold air induction and it is the best design out there, just so expensive. Then to gett hem in Red is even more. Then I need the last two pipes and we are talking over $1k. I have been on the fence and your endorsement helps. Thanks

Intake is on, definitely worth the $450. You get what you pay for and this is way better made than the rest of them. **** easy install too, nothing complicated or frustrating about it.

Power seems a bit better, but the butt dyno can't really be trusted. Sounds pretty much the same as stock, except there's a little extra noise at part throttle.

I just pulled the trigger, ordered the Cold Air Intake and the Hot Pipe Upgrade.
I already have the Noise Make Delete.

 

[FiveLeeter918]

I installed the ECOPOWER Noise maker delete on the other side. I see you just have the stock tube but blocked.
I powdercoated REd and I saw this cold air induction and it is the best design out there, just so expensive. Then to gett hem in Red is even more. Then I need the last two pipes and we are talking over $1k. I have been on the fence and your endorsement helps. Thanks


I just pulled the trigger, ordered the Cold Air Intake and the Hot Pipe Upgrade.
I already have the Noise Make Delete.

well worth it! Not only for the coolness factor, but also preventative maintenance against all the plastic and rubber potentially cracking under increased boost.

 

[dinojc86]

well worth it! Not only for the coolness factor, but also preventative maintenance against all the plastic and rubber potentially cracking under increased boost.

 

[FiveLeeter918]

great now I get to practice my hand stands

 

[dinojc86]

great now I get to practice my hand stands

lol.