Search results

  1. C

    hard wiring speakers

    i did do a continuity test from the radio out to 2 of the speakers (the two that were shorting) and that turned out fine, but no ohm test.....
  2. C

    no cruise or horn, i can get you the horn at least

    well, as i had it seems it is common for us to have the cruise and the horn stop working at the same time.....finally i can contribute some helpful advice after taking soooo much! on the clockspring side of the Cruise Control clip, make a jumper to short wire #6 (orange) to wire #10 (black) and...
  3. C

    hard wiring speakers

    well, guys and gals, i tried forever to find my short in my radio wiring....to no avail.... so I removed the whole wire (containing the speaker inputs) that ran from the radio to the amp to find nothing out of the ordinary. madflame Now I am going to hard wire the speakers, but I have a...
  4. C

    static first, now no sound

    ahh, but i tried that already and it didnt work..i forgot to mention that its to the point now that i think i am going to run new wire straight to the speakers
  5. C

    static first, now no sound

    alright, well i have had a aftermarket HU in my sho for over a year now and then all of a sudden one day i start getting all this static through the speakers... so i take it apart to chekc for a loose wire or something...put it back together and now...nothing.... no sound at all...if i jiggle...
  6. C

    dont understand spring/strut cmobos

    okay, so i want to lower the SHO as much as possible...im guessing thats INTRAX...so do different struts act different with those springs?....what are the best for this setup?..
  7. C

    dont understand spring/strut cmobos

    well, upgrade yes.....but spend a good amount of money, no I just thought that i could goe koni-less and jsut get some regualr NEW struts and wondered if that would be fine but i do want to lower it
  8. C

    dont understand spring/strut cmobos

    if i buy the eibach springs, do i also have to replace the struts?.....and why are konis so expensive?.....is there any way to drop the SHO more than a 1 , 1/2 drop.....can you even tell the difference?
  9. C

    putting on the fiat wing

    what ya mean, why?...i am tired of looking at taht 'spoiler' just laying on the trunk...i know the car is FWD, but it still looks off to me
  10. C

    Tranny computers

    well, how much trouble is it to replace the whole computer...i mean i know how to get the computer's 'chip' out...but damn, there is a lot of stuff back there with all that.......
  11. C

    putting on the fiat wing

    yeah, my bad i meant the fiero wing....but i already have the factory spoiler, so what will i do about those holes, sand and bondo?...if so... is there any other wings that will bolt directly into those holes????
  12. C

    putting on the fiat wing

    how hard is it, and about how much work is involved?....any drilling ...im hoping not
  13. C

    Tranny computers

    OK, so I have a 93...POS...anywho, I am thinking of getting it rebuilt in a while, $ providing....so Im wondering if when I do this, can I jsut put in a CHIP from a 94-95 SHO???? or would this cause a catastrophy?
  14. C

    crazy tranny problems

    alright, i know first responses are the tranny is going out and i figure that much. But, recently my ATX has been doing some really hard downshifts, enough to actually throw you forward with some velocity. it only does it when the car is warmed up to middle of the temp gauge. and when it does...
  15. C

    AC problem driving me up the wall!

    My AC hasnt worked all summer. I knew it ahd a leak, but had no time to fix it...never ran the compressor or anything... but now, i can charge it up at night and it will blow cold....but the next morning it will be dead and have no charge!! :confused: ! I just filled it up with that UV dye...
  16. C

    sometimes SHO shuts off

    sometimes...only when i am reversing and then i switch to drive (atx) without coming to a full stop, the SHO just cuts off...i thought it only did it when it was cold, but it did it the other day in a parking lot, the first time it wasnt in the morning and in my driveway... i dont want to get...
  17. C

    Stripped Oil drain plug!!!!

    yeah...i already have one bought, but i cant get this damn bolt out... tmorrow i am goin to try to hammer a smaller socket onto it and see if i can get it off....or i will then proceed to jb weld a nut on to the front of the :mad: bolt-head and takea crack at that... wish me some good luck...
  18. C

    Looking to upgrade system

    i dont know your budget...but i put a sweet aiwa head unit in for $120..then put 3 10's with a 600w legacy amp and a box for about 250... lots of bass: but two 10's sounds better in my opinion... id just get the head unit and some 3-way 7x10's for the back
  19. C

    Stripped Oil drain plug!!!!

    the prob. with the extractor idea is that the drill wont fit up in the space to drilla straight hole throught the plug....what can i do for that then?>
  20. C

    Stripped Oil drain plug!!!!

    I stripped my freakin oil drain plug...what can i do? the metal is so freakin soft all i have been able to do is make it worse.....impact wont work...gator wrench socket wont work, vise grips dont either.....any ideas??? :mad:

Latest posts

Forum statistics

Threads
107,084
Messages
1,181,288
Members
16,152
Latest member
Satchmoz

Members online

Total: 473 (members: 2, guests: 471)

Share this page

Back
Top