Wsho
SHO Member
Went out to wash the car clean up the tires got home and this was waiting for me. So I guess I know what I'm doing tomorrow.
So what did you do to your SHO today!?
- Thread starter LongNap
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
2010-2012 PTUs have no drain plug. Only the 2013+ with Performance Package get a drain plug (and cooling).
Joshw0000
SHO Member
I got my 10hp last year for changing the trunk lift supports....after a nasty headache.
Sent from my SM-N960U using Tapatalk
Wsho
SHO Member
Correct, I have 2014 non PP, just got my PTU replaced recently by the dealer and no drain
I can't drill it for drain because it under 2 year warranty unlimited miles...
So if it could be drilled where would be the right positions to do it? Has anyone drilled in for a new drain plug?
Is it worth doing this upgrade?
luigisho
SHO Member
https://shoforum.com/index.php?threads/rdu-blackstone-laboratories-test-results.140761/#post-1526611
Post # 9 in this thread
Is this PTU post stickied somewhere? That's something that needs to be easy to find.
Zpak
Es Aich Oh!
Feel much difference?
Joshw0000
SHO Member
Ordered a Dorman 02602 & 02603 from Amazon to plug the factory noise maker.
Sent from my SM-N960U using Tapatalk
Sent from my SM-N960U using Tapatalk
SM105K
Streetlight Grand Prix Champ/ IG @fafomotorsports
No, but it looks alot better.
15SHOPP
SHO Member
Loaded up my new GH tune (still have my AJP tune as well), swapped to synthetic oil and went ahead and did a trans drain/refill since I was in there.
Also installed the front Anthony D. mount since I was right there. Coupled together with my 18+ rear mount, it definitely makes for a clean shift. Can’t wait to install the rear one and break them in!
Ordered O2 defoulers to install those once I get my car in to modify the current FRPP catback - going to delete my 3rd cat and replace the current resonator with a longer Borla resonator with a built in Xpipe.
Also installed the front Anthony D. mount since I was right there. Coupled together with my 18+ rear mount, it definitely makes for a clean shift. Can’t wait to install the rear one and break them in!
Ordered O2 defoulers to install those once I get my car in to modify the current FRPP catback - going to delete my 3rd cat and replace the current resonator with a longer Borla resonator with a built in Xpipe.
StealBlueSho
SHO Member
Rattling in trunk lid fixed.... bolt from the rear spoiler came off... screwed it back onto the offending side....
/sigh...
Sent from my iPhone using Tapatalk
/sigh...
Sent from my iPhone using Tapatalk
What x pipe to add with ppe catted dps?
15SHOPP
SHO Member
The Borla resonator has a built in X pipe. Since the FRPP exhaust was built by Borla, figured I’d stick with the brand. Ridding the car of the 3rd cat can induce rasp so that’s why I went with a larger resonator than what came on the FRPP exhaust. Also, the transition of 2.5-2.25 inch will be gradual instead of slamming into the stock catback/3rd cat ******. I picked up some additional flanges from PPE to build that piece back to the resonator.
I’ll be sure to post some eye candy once I get it done!
How do you sticky it? Is that something I need to do bc I'm the OP?
I love it. I did mine a while back and it does look much better! I also love this type of mod bc it doesn't cost any money, just a little time. Totally worth it.
Johnbigdog
SHO Member
No. The forum moderator will sticky something to the top of a sub forum page. Someone just has to message to moderator.
I sent message to a moderator
SM105K
Streetlight Grand Prix Champ/ IG @fafomotorsports
Plus it is super easy to remove the rear springs. Took me 40 mins start to finish. Hardest part was cutting the springs.
Similar threads
