Tweecer help please.

[jmpSHO2nd]

I am new to the tweecer and I am lerarning how to use it little by little. My issue at the moment is when I load the 80mm Lincoln MAF the car runs like crap and hesitates until 3k or so. Right now the 80mm MAF is in there but the car is programmed for the stock MAF and it runs great but as soon as I try loading the 80mm MAF it runs like crap. I know it's an 80mm MAF becaause I thought it was bad so I bought a new one and both MAFs are the same.
http://doxinh.com/danh-muc/do-lot-nam/quan-lot-nam/ Dam ngu sieu mong Do lot doc ao lot doc Do so sinh khac Cho thue trang phuc da hoi Quan lot nam

 

[Sho Amo]

There is a difference between the mark8 maf and the continental maf. Also, lean the entire maf curve out 17%. Do you have a wideband?

 

[jmpSHO2nd]

There is a difference between the mark8 maf and the continental maf. Also, lean the entire maf curve out 17%. Do you have a wideband?

I bought an 80mm Mark 8 MAF off a forum member last year and at that time I had an LPM that SHO Source programmed for my 80mm MAF but now with the tweecer when I try to use the pre loaded 80mm Lincoln MAF it runs like crap.

I also bought a new MAF for a Lincoln Mark 8 and they are the same so I know it's a Mark 8 MAF.
Quan xi nam Dam ngu sexy Do lot cao cap ao lot cao cap http://doxinh.vn/danh-muc/do-so-sinh-cho-be/bao-chan-bao-tay/ Cho thue trang phuc http://doxinh.com.vn/danh-muc/do-lot-nam/ao-lot-nam/
No, I don't have a wideband yet.

 

[yamahaSHO]

Are you loading it with your own files? If not which EXACT 80mm MAF are you loading?

 

[jmpSHO2nd]

Are you loading it with your own files? If not which EXACT 80mm MAF are you loading?

I bought the tweecer used from another forum member and it came loaded with a bunch of MAF sensor files and one of them says 80mm lincoln mark 8.
Quan sip nam Vay ngu goi cam Bao chan bao tay gia re http://roses.vn/studio/chup-anh-studio/chup-anh-thoi-trang/ ao lot nam goi cam http://trangbanbuon.com/danh-muc/thoi-trang-cong-so/chan-vay-cong-so/ http://trangbanbuon.vn/danh-muc/thoi-trang-cong-so/chan-vay-cong-so/

 

[yamahaSHO]

What does the curve look like? The TwEECer comes with all these when you download it from the site.

 

[jmpSHO2nd]

What does the curve look like? The TwEECer comes with all these when you download it from the site.

http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-rbi/ http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-rbi/ao-nguc-rbi/ Quan chip rbi http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-rbi/quan-lot-rbi/ http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-narsis/

 

[jmpSHO2nd]

I didn't try leaning it out 17% could that have been my problem? SHO AMO told me to do it and I didn't get a chance too and I forgot and I was just searching and I saw that I was supposed to.
Do lot rbi tphcm ao chip rbi Quan lot nu rbi Do lot narsis may hut sua cho me truoc va sau sinh do dung sau sinh

 

[yamahaSHO]

You're loading the wrong MAF. That looks like it's going up to 1,550 kg/hr? That's Lightning 80mm territory.

That's what your curve should look like.


Don't blindly richen/lean a curve out. Load the proper factory curve and work with the injectors if needed.

 

[jmpSHO2nd]

Is this better?
Do lot rbi ha noi ao nguc rbi Quan lot rbi Do lot nam narsis may hut sua cao cap do dung cho me sau sinh

 

[yamahaSHO]

Much better. Just compare the numbers you can see. Curve caps about the same as well.

 

[jmpSHO2nd]

This is what I am loading.
http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-winny/ http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-winny/ao-nguc-winny/ http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-winny/quan-lot-winny/ Do lot rbi chinh hang ao lot nu rbi do dung cao cap cho me may hut sua

 

[yamahaSHO]

Me too:



Also, it might be easier to use "print screen" or "alt" + "print screen" over taking a picture with your camera.

 

[jmpSHO2nd]

Me too:



Also, it might be easier to use "print screen" or "alt" + "print screen" over taking a picture with your camera.

I am using a different laptop for my tweecer that's why I am taking pics. That's weird that I had to lean out 17% to get a similar curve as you. I will do more when I get a wide band.
Do lot winny tphcm ao chip winny Quan chip winny Do lot nu rbi ao lot rbi thoi trang be *** cao cap do dung cho me truoc sau sinh

 

[yamahaSHO]

Did someone play with the files? Or did you download it from TwEECer's website?

 

[jmpSHO2nd]

Did someone play with the files? Or did you download it from TwEECer's website?

I loaded it from the tweecer site a few weeks ago. I am so ****** because for the past few weeks I thought there was something wrong with the car and I replaced a lot of parts in the process and I never once suspected the tweecer.
http://doxinh.com/danh-muc/thuong-hieu-do-lot/hang-vera/quan-lot-vera/ Do lot winny ha noi ao nguc winny Quan lot nu winny Do lot rbi thoi trang cho be *** do dung cho me

 

[Sho Amo]

For some reason Adam had posted for all the atx cars to lean out their 80mm maf curve 17%. I did some tuning on Scott's car saturday night and confirmed this to be correct. Without the maf leaned out his wideband was maxed out rich at 10.0, then leaned it out and was into the lower 12 range.

 

[yamahaSHO]

I'm not sure why they would be different for ATX given the file is the same, but that's what mine loaded at.

 

[whiteguy3]

Idk know why exactly either, but originally Axianator said to do that. I think it has to do with the way the D4U1 binary reads it.

 

[yamahaSHO]

That's what I was thinking... Odd though.

I've never messed with an ATX when it comes to tuning.