Someone help .... Please :(

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

naval-avi8or

New Member
Joined
Mar 1, 2002
Messages
1,597
Reaction score
24
Location
Chesapeake, VA
Shoman94~ I was just trying to make a piont that just because the tach didn't move doesn't the cps is for sure the problem just a place to start.

Here is my first response~ You've just narrowed it down to your CPS. Double check the connector to make sure its not faulty or corroded. But you will still need to change it to totally fix the problem.

The Broken wire was just a rebutle to the previous statment.
 

John

New Member
Joined
Feb 25, 2002
Messages
185
Reaction score
0
Location
PA
The connector is not faulty at all....
Thanks Guys For your help..
John
91SHO
 

John

New Member
Joined
Feb 25, 2002
Messages
185
Reaction score
0
Location
PA
Well i decided to get the parts
these are the parts that i am ordering:
crank shaft sensor and with this would i need a pick up assembly the guy mentioned it on the phone.
also a crank shaft seal because i am leaking oil from it , a timing belt , and lower control arm because mine is messed up..
Thanks,
John
91SHO
 

luigisho

SHO Member
Joined
Nov 2, 2001
Messages
13,265
Reaction score
5,143
Location
va beach,va
Might want to consider water pump replacement if it hasn't been done in a while. You're already in there. No point in going back in later.
 

Forum statistics

Threads
107,077
Messages
1,181,198
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top