Size allen for MTX tensioner.

[SVOFANATIC]

I'm at work and I forgot to bring my tensioner with me I need to get an allen wrench for the mtx timing belt tensioner does anyone know what size it is? 4.0 or am I way off?

 

[Ishodu]

I think its 6mm for the timing belt and am sure its 5mm for the idler pulleys on the serpentine belt.

 

[rubydist]

I was going to say 5mm for both.

 

[Ishodu]

It very well could be 5 for both. But if he had 5 and 6 he would be safe for sure. The easy way to tell would be to open the little window and check before digging in.

 

[JRA2000TL]

5mm for the pulleys, I know for a fact. Not sure about the t-belt tensioner.

 

[SVOFANATIC]

Ok for anyone ever searching this it is a 6mm

 

[Ishodu]

Well good my mind is slightly better than I expected.

 

[mosho93]

Yup, 6mm even though Sho Phoenix Project's write up on the front 60k says 8mm for the timing belt tensioner for an MTX...

 

[Racer X]

5mm for the front and rear accy tensioner screws.

6mm for the timing belt tensioner.

 

[whiteguy3]

^ What he said