Working on a buddies 91 MTX SHO. The secondaries are open all the time! The hoses and solenoid are all in good working order. The butterflies stay open all the time, they don't close when the engine is started. I tried replacing the solenoid that controls the vaccum at the back of the intake with a known good one. Nothing! What do I try next? Computer? Any help appreciated.
secondaries won't open
- Thread starter AREA 91
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Machspeed
Former 1991+ owner
You sure you got all the vacuum lines hooked up right and theyre not leaking?
Help me out guys and gals. headbang All that is left to change is the computer. Any other ideas? shrug Does it matter if this is a 3.2 MTX4 combo? It's a 91 with a LOS computer. Can I use a B9B, or B9B1? Any help is appreciated. finger
projectSHO89
SHOless In St L
See this thread http://www.shoforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=17;t=003640#000005
And here: http://www.shoforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=17;t=005579#000007
The 8th post in the thread might help: http://www.shoforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=17;t=006453
And a complete procedure in this thread: How to troubleshoot the secondaries
And here: http://www.shoforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=17;t=005579#000007
The 8th post in the thread might help: http://www.shoforum.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=17;t=006453
And a complete procedure in this thread: How to troubleshoot the secondaries
Similar threads
