Replaced starter, and relay... still no go...

[JustInSideThG8s]

fisrst off i broke the starter igintion relay and so i tried to zip tie and super glue it back together... i know bad idea... well it broke/fell apart and the wires were continuosly touching causing the starter to be on even thought the engine was running... bad sound! i got out and quickly seperated them...
next day got a new one... started er up just a whine and no turning over what so ever... now i replaced it with a used starter and same thing...

i have no idea what it could be at this point...
i've heard maybe a fuse or the wires themselves...
could it be that the flywheel teeth are now stripped...?

any help would be hugely appreciated...
especially since i shouldve been at work 15 minutes ago...
no use worrying about that now...

 

[Off Road SHO]

The teeth on the ring gear of the fly wheel is probably ground off. Easy enough to check, pull the starter off again and look at it.

Tom

 

[0V3RC10CK3D]

Yea, thats my bet, the flywheel is worn or when doing so one of your cables connecting to it shorted.