P0130 code

[wuzzzer]

Anyone else pull this code with a CEL? I've reset it a couple times and it's come back after I drive it a few times.

 

[SHOdded]

http://www.obd-codes.com/p0130
http://repairpal.com/OBD-II-Code-P0130-and-P0136

Need to check wiring, sensor properly seated etc. May just need a new sensor.

 

[shaker281]

You could swap the bank 1 sensor 1 with another HEGO and see if the code follows to the new location (if no problem found at wiring or connector).

IIRC sensor 1 is pre-catalytic converter. Not sure which side is bank 1 (might be "drivers" side).

 

[SHOdded]

Bank 1 is the firewall side on the transverse (e.g., SHO/Flex/MKS/X) engine. Bank 2 is the radiator side of the engine.

On the F150, Bank 1 would be the passenger side, Bank 2 the driver side of the engine.

 

[SHOnUup4]

Do you have aftermarket downpipes? Catless by chance. Wondering if you're getting some spark blowout and it's clouding the 02's readings?

Rich

 

[wuzzzer]

Only mods I have are a tune and 3 bar map.