My Speaker Set-up

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

LOUDSHO92

SHO Master
Staff member
Club Mod
Sponsoring Vendor
Joined
Dec 4, 2001
Messages
5,550
Reaction score
1,042
Location
Rancho Cucamonga, CA
I missed that the amp was 1Ohm stable. It didnt list the output for the amp at 1Ohm. You are right on that one.

As far as a cap, well when my subs would hit the lights would dim as well as I had slight alternator whine. Well all of the wiring checked out so I got the cap, problems solved. It fixed my problems and allowed the subs to hit harder. So it worked and has been working since.
 

SHO-Me-Up

New Member
Joined
May 5, 2004
Messages
23
Reaction score
0
Ok, I looked over a few things and i'm going to compile the list of things i plan on getting.

The Subwoofers... 2 of These
http://www.sounddomain.com/sku/PIOTSW305DVC

The 6x9 Rear Speakers
http://www.sounddomain.com/sku/PIOTSA6990R

The 6.5 Door Speakers
http://www.sounddomain.com/sku/PIOTSA1680R

The 3/4 Dome Tweeters
http://www.sounddomain.com/sku/PIOTST15

The Reciever
http://www.sounddomain.com/sku/PIODEHP4600MP

The 4-Channel Speaker Amp
http://www.pioneerelectronics.com/p...B,00.html?compName=PNA_ProductDetailComponent

The Sub Amps (One of these per Sub [Going to bridge the Channels])
http://www.sounddomain.com/sku/PIOGM5000T

The Capacitor
http://www.sounddomain.com/sku/LITLSD10DT03

The Set-up:

Sub1 ---- Sub Amp1 ---> 380w RMS Bridged
_____________|-- Capacitor ____________|--760w RMS Total
Sub2 ---- Sub Amp2 ---> 380w RMS Bridged


6x9-----6.5
_____|------4-Channel Amp
6x9-----6.5


3/4 Dome Tweeter
______________|----Reciever (Crossedover for High Range and Bass Block)
3/4 Dome Tweeter

*Disreguard These---> ________*

If there is any problems with this set-up, please inform me
 

LOUDSHO92

SHO Master
Staff member
Club Mod
Sponsoring Vendor
Joined
Dec 4, 2001
Messages
5,550
Reaction score
1,042
Location
Rancho Cucamonga, CA
Looks good. I would wire the the cap to feed into the 2 subs amps. What will be your wiring kit? You get one as well as some RCA cables, I had mentioned some small Monster Cable ones earlier. Also I would get a new battery cap becasue in a previous system I had terrible corrosion with the standard connectors. I got some really nice Monster Cable ones that hade 3 outputs. I have not had any corrosion with them. You might want to also get new speaker cable for the connections from the amp to the speakers.
 

Sho_Freak

^^ Awesome!
Joined
Jan 10, 2004
Messages
572
Reaction score
3
Location
Iowa
what i did was get the 6x8's i did have 6x9's back there, and they didnt sound close to as good as the 6x8's , and the 6x8's are cheaper and bolt right up in the stock locations......look at these, theyre what i got and they are great http://www.etronics.com/product.asp?stk_code=piotsa6880r&store=&catid=359 or thesehttp://www.etronics.com/product.asp?stk_code=piotsd680r&store=&catid=359 as for the 6.5's they are great i got the pioneer 4 ways(exactly what u showed on the link)and they bolted right up, right in the holes, watch for the windows goin down tho....it all sounds great, and ur sub setup reminds me of my old one, that got taken by the po-po for disturbin tha peace........now im bumpin 1 10incher and a 300wattrms amp.....WOOOO
 

Sho_Freak

^^ Awesome!
Joined
Jan 10, 2004
Messages
572
Reaction score
3
Location
Iowa
it takes 3 tickets b4 they take them...and i got like 4 or 5...never payed em, never will..... :thumb: and they wont make me, my local cop said, its not a moving violation....heheheheh :D but i guess if ur rattlin stuff off of ur car(i had my 92 slo at the time) the cops dont seem to like it too much.... :huh: :thumb:
 

Forum statistics

Threads
107,095
Messages
1,181,353
Members
16,159
Latest member
shobroooo

Members online

Back
Top