Mounting tab thickness cobra caliper

[NJSHO]

Can someone with an unmodified cobra/mach 1 caliper bracket measure the thickness of the mounting tab? Just to clarify I need the thickness from the side that sits against the knuckle to the side opposite it. ie this measurement in red
[img=http://img168.imageshack.us/img168/7016/96pbrbracket1ik1.th.jpg]

 

[NJSHO]

Bump from the grave in hopes of getting an answer this time.

 

[gmorrell]

If you can wait until this evening, I can pull the spare Cobra calipers and brackets off the shelf and measure this for you.

Gary M.

 

[gmorrell]

Got it.

Pulled my unused Cobra PBR calipers off the shelf. The brackets are code BTR-S, the boss measures 0.830" thick, the threaded hole is M12-1.75. These loaded calipers and brackets were bought new some years ago from discbrakesrus.com, 40mm piston 1994 to 2004 Mustang Cobra.

Coincidentally, the PBR brackets on my Baer SHO 12.5" brakes, also with BTR-S brackets, have been machined down to 0.760", and it seems Baer opened the bracket mounting holes to M14-2.0 - interesting, but probably not useful for your purposes.

Gary M.

 

[NJSHO]

Thank you.