Moonroof issues - Click but no movement

[eacyde]

I purchased a 95 ATX Turd to drive around in while my other SHO gets fixed.

When I hit the switch, nothing happened so I pulled the cover and discovered the wires to the motor were all over the place and disconnected.

I had a good motor so I swapped it in. When I hit the switch, I hear the relay click for both directions, but the moonroof still doesn't move.

Where do I go from here? It is not closed properly and it is leaking into the back seat.

 

[mrecoolgar]

Bad motor?
The switch is activating the relay.
The relay sends power to the motor.
Remove the console, then the motor.
Rotate gear manually to close.

 

[eacyde]

The motor is good. At least it was when I removed it.

Does anybody know what fuse powers it? The list in the owners manual doesn't have Moonroof.

 

[SHOdded]

I'd hazard to guess that it is the same fuse as for power windows, #6 per the diagram on this site:

http://www.taurusclub.com/wiki/index.php?title=Fuse_Panel_Diagrams

 

[eacyde]

I'd hazard to guess that it is the same fuse as for power windows, #6 per the diagram on this site:

http://www.taurusclub.com/wiki/index.php?title=Fuse_Panel_Diagrams

If that's the case, then I have other problems. My power windows work fine.

Perhaps the moonroof is "stuck" and plugged up with gunk and the motor cant move it.

I'm going to get a window crank and move it manually, hopefully that frees it up enough for the motor to work.