maladies

[rpishoman]

OK, so here's what isn't working: brake lights (but tail lights and turn signals work), fog lights, high beam flash (but high beams work), hazards, horn, and cruise control . All fuses have been checked and are fine, and i replaced the switch on the brakes already. before i just take it somewhere and have them check it out, any areas i can check out?

 

[etc1006]

Multi function switch on column causes squirrley stuff. Clean it first before buying one.

 

[SolidState]

brake lights are likely due to the BOO (Brake On Off) switch on the brake pedal.

The flash to pass function could be the aforementioned Multiswitch, or it could be a bad or missing fuse, or lastly a corroded or missing DRL jumper plug located just below the air box between the fender and fender liner.

 

[baySHO_510]

I would check all the connections on the multifunction switch, and I would also make sure the brake light switch is sending a signal to the taillights--check it with a test light.