SHOrod
Reaction score
429

Latest activity Postings About

    • SHOrod
      SHOrod replied to the thread 12 Volt power source.
      I opted to tap into the power for the power sunroof just incase the DVR/radar detector is a bit noisy so that it wouldn't possibly cause...
    • SHOrod
      SHOrod reacted to yaycandy's post in the thread 12 Volt power source with Like Like.
      The lightsensor/rader behind the rear view mirror
    • SHOrod
      I'm not sure about the 2019, and I may be getting vehicles confused here anyway, but I thought my 2011 SHO had a switch in the glovebox...
    • SHOrod
      No need to do them at the same time, but you do need to apply the brake BEFORE and while pressing the start button. Is there a chance...
    • SHOrod
      SHOrod reacted to Texas Marauder's post in the thread Cold Start Noise with Like Like.
      Sounds like phaser rattle. As a test, depress the gas pedal to the floor, crank the engine for 10-15 seconds (the engine won't start)...
    • SHOrod
      SHOrod replied to the thread Cold Start Noise.
      Is the noise you're referring to definitely related to the rotation of then engine? Does it sound like valvetrain noise, bottom end...
    • SHOrod
      Welcome to the forum! Diagnostic codes for the climate controlled seats are not powertrain codes and therefore will not be displayed by...
    • SHOrod
      SHOrod reacted to Junkyard_Mad-Scientist's post in the thread 3D printed parts with Like Like.
      I did consider trying to break it down either by cutting it in half and adding dowel points to strengthen it or by adding the clips post...
    • SHOrod
      SHOrod replied to the thread 3D printed parts.
      Ahh, okay. You might also consider printing it in two pieces (cage as one piece with 4 walls, top as another) and then using solvent...
    • SHOrod
      SHOrod replied to the thread Wipers.
      Do you have access to a high end scan tool or Forscan? If so, you can monitor via the scan tool if it's detecting the switch settings...
    • SHOrod
      SHOrod replied to the thread 3D printed parts.
      Since you don't have overhangs on the side, you might consider printing this on end and using a tree support to minimize the amount of...
    • SHOrod
      SHOrod reacted to kryptto's post in the thread What is this? with Like Like.
      That wire looks bad I, I would not trickle charge to the two battery posts and would possibly remove it if it was me.
    • SHOrod
      SHOrod replied to the thread What is this?.
      Most trickle chargers will come with a matching pigtail, and you'll probably find most use that common connector. But as mentioned by...
    • SHOrod
      SHOrod replied to the thread What is this?.
      That looks just like the standard 2-wire connector for a trickle charger/battery tender. Well, except the one terminal appears...
    • SHOrod
      Since you mention "bumper trunk release" in your first sentence I'll assume you're specifically referring to that one. Does the trunk...
  • Loading…
  • Loading…

Forum statistics

Threads
105,950
Messages
1,168,985
Members
15,216
Latest member
Bmaples57

Members online

Back
Top