LPM HELP Please!

[Mr. Chad A.Meirose]

I have a TED B. ( who now pushes absinthe and was on the History Chanel no less) LPM and he is no longer programming them.
I have had this off of my car for several years due to the know issues with ted programming and the X2J.

I have a 80MM MAF and an LPM sitting her doing me no good.
where can I get this re programmed.. BTW I have the hardware to program it too... but no chips and no software, or a comp old enought to do this programming.

any help?

chad at tubbylunchbox dot com

please help me

 

[Lupo]

I have a TED B. ( who now pushes absinthe and was on the History Chanel no less) LPM and he is no longer programming them.
I have had this off of my car for several years due to the know issues with ted programming and the X2J.

I have a 80MM MAF and an LPM sitting her doing me no good.
where can I get this re programmed.. BTW I have the hardware to program it too... but no chips and no software, or a comp old enought to do this programming.

any help?

chad at tubbylunchbox dot com

please help me

What style LPM do you have? The ribbon style, or newer block style?
I might be able to help. What was the issue with the Ted programming?

 

[Eric VerValin]

When and where was he on the History channel?

 

[Mr. Chad A.Meirose]

http://www.youtube.com/watch?v=5wqW1IgSKmI
see him in action.

 

[Mr. Chad A.Meirose]

BTW the way i found this out is my address book porting to linkedin.

 

[Lupo]

Wow! Are we sure that's the same Ted B.?

 

[Sho Amo]

yeah this topic was here on the forum not too long ago.

 

[Mr. Chad A.Meirose]

I was as the company name on linkedin and the one from the sho(w) were the same, and all I had was an old Email for Ted. in other news Steven Peele (formerly of cincysho is out on likedin too)

 

[Eric VerValin]

Holy crap... I seen that show and never noticed the name... maybe its because they pronounced it right.. lol Why didn't he hook me up then years ago when I got my chip from him.. .that woulda been a nice suprise...

Then I could try to dispell the myth myself... intresting to know.... I would also like to know who is good with programming those chips too... as I still have a flashable one, and shortly I will need a tune change.. and don't really want to buy a tweecer r/t

If anyone can, and wants to make a few bucks... PM me so I know who u are..

 

[Slo-Sho]

I have the hardware to program it too...

Atleast one major obstacle is over, there was a fellow that goes by Axianator who may possibly be able to help you out. I too, have an LPM that is sitting in a drawer waiting to be rewritten like dozens of others out there.

 

[Mr. Chad A.Meirose]

Atleast one major obstacle is over, there was a fellow that goes by Axianator who may possibly be able to help you out. I too, have an LPM that is sitting in a drawer waiting to be rewritten like dozens of others out there.

by the way, you sir have my typical handle.....
only I would use slosho not slo-sho

 

[Slo-Sho]

Some say friday others say fridee...

 

[hawkeye18]

Axianator's real name is Adam Varney and he's a very stand up guy, but he just got a new kid, a new job, and a new house in a new town... well, ok, that was almost a year, but I've gotta assume he's a busy dude. I haven't seen him in a long while.

 

[Axianator]

Axianator's real name is Adam Varney and he's a very stand up guy, but he just got a new kid, a new job, and a new house in a new town... well, ok, that was almost a year, but I've gotta assume he's a busy dude. I haven't seen him in a long while.

Close...that would be Adam Parrott. Adam Varney is my blonde-haired counterpart from Iowa who travels under the moniker ACV1081.

Unfortunately, a number of various circumstances forced me to place my plans to launch the aforementioned LPM programming services on hold last year. However, I still have all of the hardware and software to read/write the ribbon- and Moates-style LPMs, so we'll see what happens once I've eased back into forum life.

In the meantime, I have 10 months of threads to read!

 

[Toolman]

Welcome back Adam!

 

[SeanMc]

Close...that would be Adam Parrott. Adam Varney is my blonde-haired counterpart from Iowa who travels under the moniker ACV1081.

Unfortunately, a number of various circumstances forced me to place my plans to launch the aforementioned LPM programming services on hold last year. However, I still have all of the hardware and software to read/write the ribbon- and Moates-style LPMs, so we'll see what happens once I've eased back into forum life.

In the meantime, I have 10 months of threads to read!

I guess you got my text message .

Welcome back Adam

 

[hawkeye18]

Shit... I meant Parrott.. I always get the two names confused. Sorry Adam! :wave:

 

[firstgen89sho]

Welcome back there Adam....

 

[jeffrotech]

So, it's been a few months... any update on reprograming LPMs?

Anyone revealing what software (& hardware) that is needed???

 

[LOUDSHO92]

I dont think you will be able to program them yourself but I do know someone who can. Ill see if they want to.