Leak-down test

[dwarf]

How do you put the cylinders 2-6 in TDC to perform the cylinder leak down test.

You put cylinder 1 at TDC by putting each camshaft indent at 12o'clock and the crankshaft indent at 5'oclock right?

 

[89SHO X2]

12 and 5. yes. never done a leakdown test. i would assume drop a long screwdriver in #2 plug hole and a 19mm socket on a ratch to the harmonic bolt. crank around till the screwdriver tops out a its highest point and it is at tdc. hope this helps a little.