IRMC

[oh_SHO]

Trying to help a buddy out. Does anyone have a picture of the IMRC?

<small>[ November 22, 2003, 10:37 PM: Message edited by: oh_SHO ]</small>

 

[projectSHO89]

The IMRC (Intake Manifold Runner Control) system is more commonly referred to as the "secondaries".

Here is a thread with photos of one of the IMRC vacuum motors: Picture of Secondaries

The complete system includes the IMRC solenoid and vacuum accumulator mounted to the rear of the intake manifold, the vacuum lines, the buterflies inside the plates on the inner sides of the intake, and the computer control.

Can you be more specific as to which part of the system you need a picture of?

Steve

 

[oh_SHO]

Ok, a picture of the IMRC solenoid is what I need. Thanks.

 

[projectSHO89]

Here ya go:

The photo shows the cylindrical vacuum accumulator at the bottom. Directly above it is the solenoid with the small round black cap on it. Above that is the DPFE sensor and plug.

The photo shows the vacuum lines from the intake to the accumulator to the solenoid. The output vac line is not visible.

Sorry about the quality, I did not have the exposure and lighting set for this photo when it was taken.

Steve

<small>[ November 24, 2003, 08:21 AM: Message edited by: projectSHO89 ]</small>

 

[oh_SHO]

Thanks Steve. That pic is more than adequate.