Cward
finder of parts
Well, haveing a problem with the rescue project. I've been driving the car for about a month. Anyhow, when I put the wheel bearing in it to get it on the road the battery was dead. Jumped and let it run for a while to charge the battery. Drove it for like a week. Get to work one day and shut it off as the gate wasn't open. Sit for like two minutes and the car wouldn't start. hmmm Pulled the battery terminals and cleaned them and jumped started it. Drive it to my parking spot etc is flashing off and on and doing crazy things. Park it and it doesn't start again. Put a battery in it after work and it starts right up. Okay cool. Fastforward to today, about 2 weeks later. Driving along come to a stop sign. And manage to stall it out, lots of traffic due to road construction, any way. Car is dead as a doornail. No lights no nothing.
Push it out of the way. Monkey with the connections some still nothing. A guy stops and gives me jump. Took a couple minutes if that and it started right up. Now I was only like a mile from home everything seems good. Get home etc is flashing again, and the motor pulls down when I open the door. Look at it some more. Step on the brakes and it dies. Dead as a doornail again. Any thoughts, cables? Battery again? I noticed the negative terminal is a little loose, and doesn't look like it will tighten anymore with out breaking. I'm going to swap that terminal tommorrow. Do you think that will fix the problem? I pulled the neg terminal off and put it back and it didn't even spark. Suggestions, PLEASE!
Push it out of the way. Monkey with the connections some still nothing. A guy stops and gives me jump. Took a couple minutes if that and it started right up. Now I was only like a mile from home everything seems good. Get home etc is flashing again, and the motor pulls down when I open the door. Look at it some more. Step on the brakes and it dies. Dead as a doornail again. Any thoughts, cables? Battery again? I noticed the negative terminal is a little loose, and doesn't look like it will tighten anymore with out breaking. I'm going to swap that terminal tommorrow. Do you think that will fix the problem? I pulled the neg terminal off and put it back and it didn't even spark. Suggestions, PLEASE!