HIDs w/Newer Slim Ballasts

[Bizzy]

Hawk, no worries. I figured that you didn't realize that this was the group buy section, same as Vnuk didn't.

Here's the other pics James.

 

[SC and SHO Blazer]

These are still going, Guys!

 

[gmail]

??? is this a group buy or what ?
price isnt bad so im interested.

 

[Big D]

How many people do you need before this is a go? You could probably count me in for singles for my jeep and the SHO, provided the banker ok's it!

 

[SC and SHO Blazer]

Actually, we're doing these on an individual basis...so, if you are interested, I'll pm you payment information. Just let me know what vehicle and the kit and temperature you'd like. Thanks.

James E.

 

[Big D]

PM Sent..

 

[Big D]

9004 HID's (10000K) x 2

Payment Sent!!

 

[CademiaX]

Do you have pics of the 30,000K? I like the idea of having them close to red so it doesn't **** my night vision(not night vision goggles)

Might be in for those if you have some decent pics.

 

[spazmoid]

does anyone know of any projector beam lights that would fit in the fog light openings? I'd like to have the correct projector beam and it would be easier to install them as driving lights. Plus i think it would look good having them down low like that.

 

[CademiaX]

does anyone know of any projector beam lights that would fit in the fog light openings? I'd like to have the correct projector beam and it would be easier to install them as driving lights. Plus i think it would look good having them down low like that.

hehe, i was planning to do the same thing

 

[SC and SHO Blazer]

Do you have pics of the 30,000K? I like the idea of having them close to red so it doesn't **** my night vision(not night vision goggles)

Might be in for those if you have some decent pics.

Sorry, just saw your request. I'll get some pics of those 30000Ks for you. I'll tell you ahead, they're mostly PINK and not red, but BRIGHT AS **** TOO!!!

does anyone know of any projector beam lights that would fit in the fog light openings? I'd like to have the correct projector beam and it would be easier to install them as driving lights. Plus i think it would look good having them down low like that.

I doubt it. What you could probably do is just get some of the Matrix or Piaa or Hella projector fogs that you can modify to fit our cars and have an HID kit installed in them.

James E.

 

[Sho Amo]

Heres my new hid's i got from james. they are 6000k



And the whole setup.



since mine is a 91 couldnt get them to work at first, and ill admit i was alittle worried. what i had to do was take the stock headlight connector apart and switch the leads around until i figured out which one went where. i havent gotten a chance to see them in full dark yet though. more picitures will come.

Great Product

 

[CademiaX]

Sorry, just saw your request. I'll get some pics of those 30000Ks for you. I'll tell you ahead, they're mostly PINK and not red, but BRIGHT AS **** TOO!!!

Heh, thats fine I'm going to be doing projectors in place of my fog lights, can't wait to get some pics of it up, I mostly have everything ready to go. Found some stuff that only needed some minor modding to bolt on, and they look great so far

 

[sho2see]

so the 8000k is light blue and the next up is 10000k right? I think ima have to jump on a set.
Been wanting a set for the fogs but dont want the white hid's i want a hint of the blue but not too much blue.

 

[Vnuk1]

so the 8000k is light blue and the next up is 10000k right? I think ima have to jump on a set.
Been wanting a set for the fogs but dont want the white hid's i want a hint of the blue but not too much blue.

Then I would go with the 8,000K as I have 10,000k and they are pretty blue..

 

[blue2ndgen]

Would a set of these work for a 2004 Subaru legacy? They are also a 9007 bulb but the connection looks different.

 

[sho2see]

What kind of payment do you except. Please PM for the further instructions

 

[FOMOCOTOSHO]

Attn: James E. & other buyers:

I just received & installed my dual filament 8000k kit last night and I have 2 problems/questions:
1) Since the way these things are wired into your stock headlamp sockets utilizing only 1 of them, how do you get around the stupid dummy light on your instrument panel telling you have a "lamp out" ??? Plugging a burnt out bulb in place doesn't do anything either because it still recognizes a bulb is burnt out & I don't want to light up my engine bay with an exposed bulb sitting next to my CCRM.
2) I ordered the dual filament hi/lo beam kit but my brights do not work. I tried several times & rechecked the connections & wiring about ten times last night but my lights only work on low beam only, the high beam setting changes absolutely nothing about how the lights look or work.

If you (James) or anyone else have any answers to these questions please contact me ASAP. You can pm me or email me direct @ [email protected]

James, please refer to our emails as I would prefer you call me if there seems to be some sort of defect in the product or a mixup on what product was shipped. I did confirm the box DOES say "BI-XENON 9007/4 8000K"

Thanks,
Chuck

 

[SC and SHO Blazer]

Would a set of these work for a 2004 Subaru legacy? They are also a 9007 bulb but the connection looks different.

If the Legacy is a 9007 bulb, they should work. These kits have also worked on a Jeep and a AMC (surprise surprise)....so they're not Ford exclusive.

Attn: James E. & other buyers:

I just received & installed my dual filament 8000k kit last night and I have 2 problems/questions:
1) Since the way these things are wired into your stock headlamp sockets utilizing only 1 of them, how do you get around the stupid dummy light on your instrument panel telling you have a "lamp out" ??? Plugging a burnt out bulb in place doesn't do anything either because it still recognizes a bulb is burnt out & I don't want to light up my engine bay with an exposed bulb sitting next to my CCRM.
2) I ordered the dual filament hi/lo beam kit but my brights do not work. I tried several times & rechecked the connections & wiring about ten times last night but my lights only work on low beam only, the high beam setting changes absolutely nothing about how the lights look or work.

If you (James) or anyone else have any answers to these questions please contact me ASAP. You can pm me or email me direct @ [email protected]

James, please refer to our emails as I would prefer you call me if there seems to be some sort of defect in the product or a mixup on what product was shipped. I did confirm the box DOES say "BI-XENON 9007/4 8000K"

Thanks,
Chuck

Chuck...didn't know you posted this here, but as you know we're getting all of this situated. New bulbs are enroute, and did your guy ever show you the wiring trick to eliminate the "Bulb Out" light?

James E.

 

[SC and SHO Blazer]

I'VE JUST GOTTEN A PRICE INCREASE FROM THE MANUFACTURER, SO THE PRICES WILL BE GOING UP...I'VE STILL GOT ABOUT 15 MORE KITS AT THIS PRICE SO IF YOU ARE INTERESTED, THIS WOULD BE THE TIME TO BUY!!!

Just wanted to reiterate.

James E.