Help.. Need torque specs for........

[sho32g]

If anyone has the SHO helms manual could you please email or post the following.

I need the Torque specs for the following:
Front Camshaft Sprocket bolts (6 bolts in all)
Timing belt Idler pulleys (2 in all)
Water Pump to block bolts

Any help would greatly be appreciated.

Thanks!

Joe

 

[SHOfear]

<strong>
Front Camshaft Sprocket bolts (6 bolts in all)
Timing belt Idler pulleys (2 in all)
Water Pump to block bolts

15-18 lbs/ft (21-25 nm) for the cs sprockets, do you mean the nut for the idler pulley?, and 12-17 lbs/ft (16-23 nm) for the water pumo retaining bolts.

Steve

 

[sho32g]

SHOfear;

Thank You, Thank You, and yes I need the specs for the accessory idler pully (timming belt) upper right side and belt tensioner pulley left lower side.

Thanks,

Joe

 

[SHOfear]

Oh, Ok. You must have a 3.2L then. For the upper pulley, its 26-38 lbs/ft (35-51 nm), and for the lower pulley its 27-41 lbs/ft (36-55 nm).

Steve