Got tune revised with 3 bar map and....

[Lorenzo Dimas]

My intake only had one screw?? Any one know why?

 

[Majestic]

My intake only had one screw?? Any one know why?

Because they come that way. Saved Ford $38.57.

 

[SilverSH0]

2 screws is excessive and unnecessary. The hole and one screw with constrain the MAP sensor in all directions. It also costs Ford thousands of dollars for that extra unnecessary screw so it was removed.

 

[Lorenzo Dimas]

2 screws is excessive and unnecessary. The hole and one screw with constrain the MAP sensor in all directions. It also costs Ford thousands of dollars for that extra unnecessary screw so it was removed.

Only on 13 pp? A cerntin model or just fore there on?

 

[limited02]

Only on 13 pp? A cerntin model or just fore there on?

More likely 2013+ since my '12 MKS has two. As mentioned, it's nothing to be concerned about or worth the effort to install a second screw. Is just means you can install/remove your 3-bar faster than I can.

 

[Lorenzo Dimas]

More likely 2013+ since my '12 MKS has two. As mentioned, it's nothing to be concerned about or worth the effort to install a second screw. Is just means you can install/remove your 3-bar faster than I can.

Lol real nice way to put it guys thanxs

 

[SilverSH0]

More likely 2013+ since my '12 MKS has two. As mentioned, it's nothing to be concerned about or worth the effort to install a second screw. Is just means you can install/remove your 3-bar faster than I can.

+1 on the 2013+ vehicles. I'm also going to GUESS that it's a common change for all Ford vehicles that use MAP sensors. Again another guess, that's likely nearly all (if not all) Ford vehicles being sold.

 

[Lorenzo Dimas]

Are sct live wire ts quarter mile times accurate? Just got a 14.09 @ 102 just wondering if its worthy to send to torrie?

 

[StealBlueSho]

Are sct live wire ts quarter mile times accurate? Just got a 14.09 @ 102 just wondering if its worthy to send to torrie?

Torrie won't care about a live wire 1/4 time... he only cares about datalogs...

Now if you can get a good full 1/4 datalog.. that would be something worth sending to him...

 

[Lorenzo Dimas]

Yea that was a log(performance test) i save for him and thats what i thought he needed as "datalog"?

 

[Lorenzo Dimas]

I think i might have all this datalogging worng.. need to record the live feed wit torries config file/gauges

 

[StealBlueSho]

Did he send you a config file to load into your live wire with the datapoints he wants recorded?

 

[Lorenzo Dimas]

Yes.. i loaded it but thought i had to exit and go do a "performance test" but now doing a lil extra reading.. i have to hit to rec button and do a 0 to 80isshh

 

[StealBlueSho]

Yeppers! You got it...

 

[Lorenzo Dimas]

Thanxs and sorry i had it all confused but thanxs stealbluesho clearing it all for me.. then i guess i havnt got a revise just another base tune with updated 170 tsat and 3 bar map

 

[StealBlueSho]

No need to be sorry lol! Good luck, if you have questions we are obviously here to help!

 

[Sholab1]

2 screws is excessive and unnecessary. The hole and one screw with constrain the MAP sensor in all directions. It also costs Ford thousands of dollars for that extra unnecessary screw so it was removed.

Screwing costs money cheaper when single,

Sent from my XT1254 using Tapatalk