Front end / driveline rebuild list and prices.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

93rev2sev

SHO Member
Joined
Nov 1, 2004
Messages
6,461
Reaction score
1,825
Location
Hockeytown
I just performed the following work on my 93 MTX and as the end approached, I was beat...almost fell asleep under the oil pan with drill in hand.

None of these prices include labor because I did it all myself (except sandblasting and tranny case swap/rebuild)!

$75 Hardware and wood for engine support structure (my brother built it)
$*** Transmission - basic rebuild and case replaced
$75 Subframe sandblasted - L&R sandblasting, Brownstown, MI
$30 Primer/paint for subframe - Murray's Auto parts
$190 Subframe bushings/hardware - shonutperformance.com
$140 New driveshafts - Napa (both sides)
$75 Low mile replacement intermediate shaft, y-pipe and o2 sensors - shoforum.com member
$140 New control arms - Moog - rock auto.
$60 New Rear Motor mount - rock auto.
$100 Reinforced Front motor mount - ebay.
$30 New strut rod bushings - energy suspension - ebay
$55 New Stabilizer bar links and bushings - Moog/energy suspension - Murrays Auto Parts.
$60 New rod bearings and oil pan gaskets.
$30 New Stainless exhaust ****** studs and nuts(and 6 HS Steel drill bits). The exhaust stud project was by far the most grueling exercise this SHO owner has ever dealt with (sore arms, broken bits, face covered in rusty steel shards (I ended up cutting up a pair of the wifes nylons to wear on my head-just to keep the steel shards out of my hair and face - ugh just thinking about it makes me glad I went stainless). :naughty:
Free: Cleaned and painted everything I re-used.

Now that I have fixed my exhaust leak, I can hear my cam chains
Yay
 

Forum statistics

Threads
107,094
Messages
1,181,349
Members
16,159
Latest member
shobroooo

Members online

Back
Top