Figuring out how to get this car to start :P

[SASHO91]

What about the ground on the firewall? DIS(the bolts on the crossover tube)?
Have you tried to go WOT while cranking?

 

[SilverThunder]

What about the ground on the firewall? DIS(the bolts on the crossover tube)?
Have you tried to go WOT while cranking?

Well the main thing is I'm not getting spark. What would cause not getting spark (besides the CPS)??

 

[93rev2sev]

What about the ground on the firewall? DIS(the bolts on the crossover tube)?
Have you tried to go WOT while cranking?

Make sure the ground that SaSHO is talking about is correct. The DIS module grounds to the chassis of the car through the lower 2 holes in the module. If those are not secured to the intake crossover tube, you will not get spark. In addition, if the intake crossover tube is not connected securely to the brackets that hold it in place, you will not get spark. Check these things first and let us know so we can get creative if we need to.

 

[SilverThunder]

Make sure the ground that SaSHO is talking about is correct. The DIS module grounds to the chassis of the car through the lower 2 holes in the module. If those are not secured to the intake crossover tube, you will not get spark. In addition, if the intake crossover tube is not connected securely to the brackets that hold it in place, you will not get spark. Check these things first and let us know so we can get creative if we need to.

yeah ha....um we grounded them and it's alive such a good feeling

 

[93rev2sev]

Another non-grounded DIS solution brought to you by SHOForum.com

Congrats! now go blow your diffpin.

 

[SilverThunder]

What an accomplished feeling ha.

So now I need to go further into my list...

-Fix A/C
-Fix ABS
-Fix Antenna
-Fix power door locks
-Fix power seats
-new mufflers.

-full 60k...


well for $250 I can't complain

 

[93rev2sev]

Nope, theres a new thread for complaining.

 

[SHO Revisited]

congrats! Glad to hear she's running again. Good luck the rest of the way.