E sensor install..

[mybigsho]

So i finally installed my sensor and what an awesome piece of equipment.. I'm just not to happy with
install.. I wanted to use the original line with two strait connectors but it was to tight so i used two 90
degree connectors.. Lets see some pics of other peoples installs..
Thanks Scott

 

[mybigsho]

 

[mybigsho]

View attachment 12741 View attachment 12742

 

[skyshadow07]

What brand is the sensor? Does it feed data to a Bluetooth connection or through OBD?

 

[Zpak]

I just got a Bluetooth Fuel It sensor. It just sends the readings to the fuel it phone app. Haven’t installed it yet though. I’m waiting on a few more pieces of the puzzle first.

 

[Zpak]

So i finally installed my sensor and what an awesome piece of equipment.. I'm just not to happy with
install.. I wanted to use the original line with two strait connectors but it was to tight so i used two 90
degree connectors.. Lets see some pics of other peoples installs..
Thanks Scott

What wire did you tap into for the power?

 

[ridered74]

Was your fuel line short or something? Yours looks like it's sitting on the motor.

 

[mybigsho]

I got the fuel it bluetooth for the android and sensor from a gm vender i deal with.. The fuel hose and sensor where
to long so i had to re route to shorten with the 90's.. Got some loom and wired up under the cowl into the fuse box
with a piggy back mini fuse..

 

[Zpak]

I got the fuel it bluetooth for the android and sensor from a gm vender i deal with.. The fuel hose and sensor where
to long so i had to re route to shorten with the 90's.. Got some loom and wired up under the cowl into the fuse box
with a piggy back mini fuse..

Do you recall which fuse number you tapped into. I thought I remembered seeing somewhere 36 was a good one for keyed on power.

 

[ridered74]

Do you recall which fuse number you tapped into. I thought I remembered seeing somewhere 36 was a good one for keyed on power.

Keep forgetting to check the #, but it didn't have a fuse to start with. I used a multimeter to find one that only had power when in run position, then installed the fuse with the wire tapped into it. It was towards the middle tho.

 

[Zpak]

Keep forgetting to check the #, but it didn't have a fuse to start with. I used a multimeter to find one that only had power when in run position, then installed the fuse with the wire tapped into it. It was towards the middle tho.

Cool, thanks.

 

[ridered74]

Cool, thanks.

I'll try to remember to get a pic tomorrow.

 

[mybigsho]

I believe it's #85

 

[ridered74]

Here is where I tapped in.

 

[Zpak]

Thanks guys. I’m super excited to get this all together. Still waiting for my special package from XDI to arrive.

Stupid overbearing Michigan shutdown!