3.0-3.2 likes and dislikes??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

93SHO24V

New Member
Joined
Oct 4, 2008
Messages
129
Reaction score
3
Location
MN
Does anybody know if a 3.2 Coil will work on a 3.0?
Are all DIS boxes the same for 3.2 and the 3.0?
I know a transmission from a 3.0 will work on a 3.2 in other words a swap does anyone know if the ATX will bolt up and work with 3.0?
Could somebody give me the basics to doing the 5 speed swap
I have a 1994 SHO 3.2 auto that I want to do the 5 speed swap?
Also will the 3.2 cams work in the 3.o and are their any other mods you need to do to make the 3.0 cams work in the 3.2?
I know the 3.0 cams work in the 3.2 but does it gain any power from doing this?
I am buying a five speed SHO with 205,000 miles on the motor and tranny going to pick up tomorrow.
 
Last edited:

Racer X

SHO Pilot, Retired
Joined
Oct 27, 2002
Messages
3,446
Reaction score
1,572
Location
Connecticut
- Yes
- Yes
- Yes
- Information can be found here ----> http://www.shoforum.com/search.php
- Question does not compute.
- You'll need to adjust the valve lash following installation.
- Power curve gets pushed up slightly, resulting in a hair more top end. Intake cams are the only ones that are different. The exhaust cams are the same between 3.0 and 3.2
- I'd look for a lower mileage drive train if it were me.
 

89SHO X2

New Member
Joined
Mar 27, 2009
Messages
178
Reaction score
0
Location
Wa
3.2 has a different coil connector. i changed my maf sensor and it had a different connector but i broke some pieces off and it worked. coil will do the same i dont know.
 
Back
Top