Search results

  1. T

    1991 LH Corner marker UNOBTANIUM

    Apparently my lens decided to fly off today and I didn't notice. I need the rarest part i've tried to find to date for my 1991 sho. Please help. I have new in the boxes standard crank sensors, I have that aftermarket SHOrt shifter not the shorty. I would get rid of something you want plus...
  2. T

    Blower control module 89-95

    I need a blower control module my blower will run with the control unit off and disconnected. Thanks
  3. T

    Fuel pump contact housing or pig tail

    I need a contact housing or pig tail for an 89-95 sho fuel pump. My retainers are all broken. Nevermind i found a new one. Didnt realize they were available.
  4. T

    No power to fuel pump inertia switch, 91 MTX

    I haven't had time to find wiring diagrams. I have a lot going on right now and I could really use the help or guidance. This is my first 91 and the wiring is different than the three 92s i've owned. Full disclosure I just got done installing a different motor with the same original complete...
  5. T

    Can someone with a 3G alternator 94-95 SHO tell me where this bracket goes

    I took this bracket off a 95 parts car years ago and I have no clue where it goes or what attaches to it. One of the four a/c mounting bolts had a stud on the top and this small painted bracket bolts on it. It appears that it must be one of the bottom two holes, but I don't know which hole or...
  6. T

    Condenser changes over the years 1991 R12 Condenser

    I just started working on my 91 finally. After I pulled out the radiator I couldn't believe the size of the tubes and the width of this condenser. It is more than twice the width and the tubes are twice the size. I think it's a dual core, but I guess they all are? It is an absolute monster...
  7. T

    Tan front seat bottom full leather or 50/50 gen 1/2

    If anyone has any tan leather seats i'd pay for just the seat bottom if it costs me the price of the whole seat i'll take it. If the seats in good shape with no torn bolsters i'd buy the whole thing for a spare. I'm not sure if passenger and driver side are interchangeable i'll have to check...
  8. T

    tan steering wheel and air bag preferably gen 2

    I'll take what I can get gen 1/2 in tan. If it's a gen 1 i'll only need the wheel, but if it's a gen 2 i'll need the wheel clockspring and airbag. I'd much rather have the 93-95 wheel. The leather is bad on mine. I know it's going to be next to impossible to find one but it's worth a shot.
  9. T

    new crankshaft postion sensor 89-95

    I need a new crankshaft position sensor or a connection for obsolete ford parts. Thank You
  10. T

    Centerforce clutch set

    I just got this for 200 off amazon so I guess I can't complain too much. I expected to see a valeo stamping and a different reinforced disc without plastic as part of the construction. Gary morell said in one of his posts he didn't consider a disc high performance if it had plastic used in the...
  11. T

    OEM NOK Camshaft oil seal information

    I got a strange one here. I ordered camshaft seals a long time ago, they were generic and I was about to throw them out recently. One was an NOK oem dimension seal. The only difference was it is a steel od with only half of it encapsulated in rubber. The part number is BD2737E and the OEM...
  12. T

    Hard Start solved: injectors

    After eight years or longer I finally figured out what it was that was causing my hard starts after the engine was warmed up. An injector was bleeding off pressure and the fuel in the rail was boiling and causing vapor lock I believe. I found this out by accident one time when I pulled off a...
  13. T

    Cylinder head bolt washers

    I threw the old ones out like an idiot. If someone has a set let me know. I thought the bolts would come with them. I guess I can use arp washers i'll just have to measure the cylinder head tomorrow, but if anyone has a set let me know.
  14. T

    92 58k 4500 obo

    As far as im concerned this is a very understandable price. People are crazy with some of the prices theyre asking lately. For 4k you could have a mint turd. Check out that pimp fake wood inlay and two tone paint job. Im pretty sure its factory...
  15. T

    x2j computer

    I need an x2j computer. I don't believe there are any other comparable computers that will work but I could be wrong. Maybe an L03.
  16. T

    engine harness with computer; plug M code ccrm

    I need the engine harness with the plug that goes to the computer. It is an M code ccrm. I have a harness with a D code ccrm and it has a different plug that feeds the interior harness. I have no idea if the ccrm is what determines the harness or the year. The one I need is for a '92, the...
  17. T

    Southbend pressure plate pictures

    This pressure plate came with a car I bought. I was just curious if it was an earlier generation and it wasn't as strong as they're made now. It has only two straps? I don't mind pulling the trans again if it is no good, but there is hardly any wear on the fingers and I also got this new...
  18. T

    Code 121

    I just performed this test with my breakout box and when performing the test there is an open between both pins 26&57 without the tps unplugged. With the tps plugged in I have an open between 47&57 and the values between 47&26 are 1.572 K ohm. It only says leave processor disconnected and...
  19. T

    Gasket identification

    I just got a full oem gasket set in the mail today and the only thing it seems to lack is the oem oil cooler gasket. The bag on the left has that one copper gasket with the strange ID where does it go? I know but I can't remember. That stainless gasket in the bag on the right is throwing...
  20. T

    R12 System capacity

    I'm getting conflicting information, I spent hours researching. Can someone that still has that label under their hood tell me what it says for r12. I no longer have that information panel that is bolted to the radiator support. I'm not converting over I think it's worth the cost difference...

Latest posts

Forum statistics

Threads
107,085
Messages
1,181,294
Members
16,152
Latest member
lapochkarr

Members online

Total: 567 (members: 4, guests: 563)

Share this page

Back
Top