Seats, engines, transmissions, and other parts.

[1MADSHO91]

I need to check my parts storage and put my hands on the part before I say yes. I can let you know tomorrow evening.

Sent from my Nexus 6 using Tapatalk

I checked my parts storage. I'm sorry, I do not have a DIS module.

Sent from my Nexus 6 using Tapatalk

 

[JahMan12]

I checked my parts storage. I'm sorry, I do not have a DIS module.

Sent from my Nexus 6 using Tapatalk

Thank you for checking

 

[Edward Birdsall]

Hey 1Mad. Do you have an upper speedo cable, OEM part #F3DZ9A820C for a 94 SHO 3.2L auto? Thanks, Edward

 

[1MADSHO91]

Hey 1Mad. Do you have an upper speedo cable, OEM part #F3DZ9A820C for a 94 SHO 3.2L auto? Thanks, Edward

I will check my parts storage and let you know before I say yes. I can let you know before the end of the week.

Sent from my Nexus 6 using Tapatalk

 

[Edward Birdsall]

Good Morning, thank you for your reply. I was successful in securing this item from another Shoforum member. I appreciate your consideration. Have a great day. Happy Halloween, Edward

 

[1MADSHO91]

Good Morning, thank you for your reply. I was successful in securing this item from another Shoforum member. I appreciate your consideration. Have a great day. Happy Halloween, Edward

My apologies for the delay. If I had known you needed it ASAP, I would have expedited your request. None the less, here are some pictures in case the part you purchased doesn't work. Happy Halloween to you. Jeffrey

Sent from my Pixel 2 XL using Tapatalk

 

[shoftw]

Do you have any starters ? 3.2 mtx swap

 

[1MADSHO91]

Do you have any starters ? 3.2 mtx swap

I do not have any starters, sorry.

Sent from my Pixel 2 XL using Tapatalk

 

[EarlyBroncoGuy]

3.2 water pump pulley?

 

[1MADSHO91]

3.2 water pump pulley?

I have one, $40 shipped.

Sent from my Pixel 2 XL using Tapatalk

 

[SHO4ROBB]

89-95 ATX & MTX Parts / NEW PARTS ADDED
I know that I have had privates messages go unanswered for

Taurus SHO parts for sale

Bump :bump:

I am interested in the gen2 green fenders. Please contact me at [email protected]

parts for some time. I apologize not answering your inquiries. Please, send your parts requests. I will do my due diligence to reply. I still would like to help out in any way that I can to keep these vehicles on the road, thank you.

If there is something you are looking for, feel free to PM with your parts requests. Paypal and money orders are welcomed. Our spare parts inventory is pretty substantial, mainly Gen 1 and Gen 2 with some Gen 3 parts.

Thanks for looking, let me know if you need anything

Pricing does not include shipping.

If you need something not listed, it's worth a shot to ask if we have it.

Prices are always negotiable.

I have short blocks, heads, individual engine components, interior parts, exterior parts, body parts, wiring, etc. My brother and I have parted out and disassembled almost a dozen SHO's.


'93 115K 3.0 $350, No intake and valve covers. (Can provide if needed)

Generation One parts

Electra Current red SHO plus hood $100 Local pick up only. Will not ship. **SOLD**

Rear window glass $50
Passenger side front and rear doors, white $50 a piece
Harmonic balancer 3.0 $45 (Have 2 of them)
Driver side air bag, black $45
3.0 coil cover $10
Speedometer 6 digit $65
Driver side air bag, mocha/sandlewood $35
'90 door card set, sandlewood (no screw covers) $80 set



Generation Two parts

Rear bumper with re-enforcement, red $40
Trunk lid no spoiler, white $40
Trunk lid with spoiler mount holes, white $35
Rear bumper cover with re-enforcement and mounts, black $50
Trunk lid with spoiler, green, $30
Green driver side fender $40
Driver side front (with Keypad) and driver side rear doors, black $50 a piece
Passenger side front and passenger side rear doors, white $50 a piece
Headliner (no sunroof) $40
Two keyless entry modules $25 a piece
Passenger side fender, green $45
Tail light filler pieces, green, black and white $50 a set (will sell separate)
Driver side fender, painted black) $30
Passenger side air bags, mocha (x2), black
Front shock covers, $5 (have quite a few of them)

Generation 3 parts

Passenger side front and rear doors, silver $50 a piece
Trunk lid with spoiler, black $45
Rear tail light assembly, green $40
Front license plate bracket, red $25

ELECTRICAL

ABS HARNESS INSIDE CAR FRONT TO BACK (x2) $15

’94 INJECTOR / ENGINE HARNESS $25

’92 REAR DOOR INSIDE WIRING HARNESS $15

‘92 TAIL LIGHT WIRING HARNESS $10

‘89-91 INJECTOR MAIN HARNESS $25

‘92-UP UNDERHOOD HARNESS ABS, LIGHTS SELF TEST ABS CONNECTOR $30

FRONT DRIVER DOOR WIRING $10

‘89-95 PREMIUM SOUND WIRING HARNESS FROM RADIO TO AMPLIFIER $25

‘91 VISOR WIRING $10

‘93 MAIN DASH WIRING MISSING SOME CONNECTORS, 90% COMPLETE GOOD FOR PARTS $35

’93 MAIN DASH WIRING 90% COMPLETE $35

’90-91 LEFT FRONT DOOR BULKHEAD WIRING HARNESS $40

’90-95 PREMIUM SOUND AMPLIFIER EXTENTION CABLE $15

’90 ABS WIRING HARNESS $20

HOOD LAMP WIRING WITH CONNECTOR AND SOCKET $10

’92 TAIL LAMP WIRING $10

’92-95 INJECTOR MAIN HARNESS $25

’90-91 INJECTOR MAIN HARNESS $25

’90-91 PCM TO CCRM HARNESS $20

’90-91 BATTERY CABLES WITH ORIGINAL BATTERY ENDS $15

’90-91 ABS, COOLING FAN, FRONT OF CAR HARNESS $40

’94 INJECTOR MAIN HARNESS $25

’95 UNDERHOOD HARNESS COMPLETE, MALE BULKHEAD CONNECTOR (x2)$50

’92 UNDERHOOD HARNESS WITH FUSEBLOCK $35

’93-UP UNDERHOOD HARNESS PCM, CCRM, BACKSIDE OF ENGINE $25

TRUNK RELEASE HARD CABLE $10

Taylor Vertex 8mm plug wires 3.0 $85 (SOLD)



80mm MAF $65




Gen 1 black passenger side seat back $35

Gray Gen 3 front door cards $30

Mocha Gen 2 rear seat $50

'96 200k engine and transmission. (missing rear intake cam) $275
Chains, guides and front cover sold

'93 3.0 143k parts engine $175 (low compression)

Black Gen 2 spoiler, no LED brakelight $40

'94 owners manual $10
CCRM (2) "M" code,SOLD (2) "J" code $50 each
(2) Crank sensors $50 each
Ignition coil $40
Black Gen 3 License plate bracket $20
Gen 2 clutch quadrant with clutch cable $45
'89 JBL amp $75
'96 JBL amp $100
(2) headlight rings $20
(2) "90 JBL 6X8 speaker frames $20 pair
(3) B9B $60 each
'89 lower torque limiter $20
Headlight switch $10
Hood latch $10
MTX speedometer cable extension $25
Gen 3 3rd brake light $10
'89-91 headlight filler piece passenger side $20
Oil filter cooler, no boss, $20
ATX timing belt Idler pulley $30

X2J reman PCM $75 SOLD
Gen 2 mocha DS and PS airbag $70 set
Keyless entry module $20
Gen 2 (2) Auto lamp modules, black and mocha $15 each
Gen 2 mirror switch $10
VAPS module $25
Sunroof motor $20
3.2 liter balancer $50
SHO Plus passenger side mirror $50
Gen 1 Driver airbag $50
One touch down relay $20
'89 climate control panel, no knobs $20

Gen 2 speedometer 132,*** $40 Gen 3 ('96) 20x,*** $40

Taurus SHO parts for sale

Bump :bump:

Approved

 

[Crizcocane]

Need gen 1 front seats have any by chance??

 

[SHO4ROBB]

Are the two (1 driver & 1 passenger side) Green front fenders still available? Where are you located? Please contact me at: [email protected].
My name is Rob. (SHO4ROB & SHO4ROBB).

My inquiry/request is:
IF the ‘94 and the ‘93 SHO front fenders’ ARE the SAME, INCLUDING and specifically the “molding trim” piece (located directly under the 24V DOHC badge) AND you were willing to sell JUST the 1 each side piece of molding trim, that would be perfect as they are all I actually need along with the two badges; (but I can get the badges elsewhere if need be) and they all could be attached to my 93’s fenders that are missing them.
Besides, shipping the fenders would be inconvenient to package etc and maybe/probably would be cost prohibitive....I’m 93306 zip
Any considerations on just the trim PCs (and badges?) would be greatly appreciated. I await your reply

 

[1MADSHO91]

Need gen 1 front seats have any by chance??

My apologies for the late reply. I have Gen 1 seats, but none that are not ripped or torn.

 

[1MADSHO91]

Are the two (1 driver & 1 passenger side) Green front fenders still available? Where are you located? Please contact me at: [email protected].
My name is Rob. (SHO4ROB & SHO4ROBB).

My inquiry/request is:
IF the ‘94 and the ‘93 SHO front fenders’ ARE the SAME, INCLUDING and specifically the “molding trim” piece (located directly under the 24V DOHC badge) AND you were willing to sell JUST the 1 each side piece of molding trim, that would be perfect as they are all I actually need along with the two badges; (but I can get the badges elsewhere if need be) and they all could be attached to my 93’s fenders that are missing them.
Besides, shipping the fenders would be inconvenient to package etc and maybe/probably would be cost prohibitive....I’m 93306 zip
Any considerations on just the trim PCs (and badges?) would be greatly appreciated. I await your reply

I have numerous trim pieces for driver and passenger sides in different colors. I should have the badges also. Let me know what sides and colors you need and I will check my parts inventory.

 

[SHO4ROBB]

Not interested in seats at all....I just need the front fender molding trim piece that fits directly below the 24V DOHC fender badge. I need both the drivers and passenger side trim pieces. I also need the two METAL badges, but can get them elsewhere if need be. As far as colors, moot as they will be repainted; but if you have several to select from, the ones in best physical shape preferred.
Sure hope you have them, thanks

 

[1MADSHO91]

Not interested in seats at all....I just need the front fender molding trim piece that fits directly below the 24V DOHC fender badge. I need both the drivers and passenger side trim pieces. I also need the two METAL badges, but can get them elsewhere if need be. As far as colors, moot as they will be repainted; but if you have several to select from, the ones in best physical shape preferred.
Sure hope you have them, thanks

The reply for the seats was from another PM. I do not have any metal badges. I will check my parts and let you know as soon as I can. Thanks.

 

[SHO4ROBB]

I have numerous trim pieces for driver and passenger sides in different colors. I should have the badges also. Let me know what sides and colors you need and I will check my parts inventory.

Hey again,
I may have confused you on what trim pieces I need from my previous request.
ALL I need (want) are a total of 2 pieces, one piece for each side of the fenders. The piece I need is the stock 92-95 front fender bottom skirt ground effect, which ford calls the lower cover trim panel skin. The passenger side ford part # is F2DB-16C054-CHW. You stated you did not have the 24V DOHC badges, so I’ll search for them elsewhere.
Sorry for any confusion. Thanks
Rob

 

[1MADSHO91]

I understand that you need the bottom fender skirt pieces for the front and passenger sides. The badges I have are plastic. The metal ones came on the SHO plus models I believe. I will let you know as soon as I can about the pieces you need. Thank you.

Sent from my Pixel 2 XL using Tapatalk

 

[1MADSHO91]

Not interested in seats at all....I just need the front fender molding trim piece that fits directly below the 24V DOHC fender badge. I need both the drivers and passenger side trim pieces. I also need the two METAL badges, but can get them elsewhere if need be. As far as colors, moot as they will be repainted; but if you have several to select from, the ones in best physical shape preferred.
Sure hope you have them, thanks

I have the trim pieces you need. I am asking $40 shipped. I have PayPal.