Valve gap .127mm?

[NetNinja]

Is it unusual to find a valve gap on both the intake and exuast(front bank) to all be .127mm?

Do I need to replace my shims to thinner ones to bring the car into spec?

Wouldn't the Space between the Cam and the shim increase? This is really strange

94 ATX 140K

<small>[ March 11, 2004, 05:03 PM: Message edited by: NetNinja ]</small>

 

[RStalveyARFF]

Umm, it is VERY unusual to find them all at .127. You want .200 +/- .005 for intake, .300 +/- .005 for exhaust You will need thinner shims on every single one of those.

 

[NetNinja]

Thanks SHO91mTX.

I thought I was doing something wrong or I was smoking crack! The engine is cold.

It's really odd. Unless the last 60K was done on a warm engine.

This has been the 60K from **** frown

 

[Dr. Tweak]

There's some hints on my site that may help you out...

 

[NetNinja]

BTT