The SHO communicates!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slo-Sho

It wasn't me!
Joined
Aug 11, 2001
Messages
1,825
Reaction score
21
Location
Crossroads, CNY
By means of the damned check engine light shoot I got a code 511 (EEC ROM test failure). Can anyone shed any light on this?
 

Polar Pear 2004

New Member
Joined
Jul 5, 2002
Messages
23
Reaction score
0
Location
rossford
im not positive because i dont remeber but i think that the egr valve is clogged thats what happened to my 95 atx frost sho with 118000 on it. the light would come on about 30 seconds after moving one time and 10, minutes the next it was wierd/
 

MeShoHorny

@dm1n15tr@t0r
Joined
Jan 30, 2001
Messages
2,004
Reaction score
0
Location
NY
That's usaully the code you get when you have a chip installed (normal code if you have a chip) it should not trigger the CE light though.
Have you done a KOER test?
 

Slo-Sho

It wasn't me!
Joined
Aug 11, 2001
Messages
1,825
Reaction score
21
Location
Crossroads, CNY
Yes, code 511 and 172,173 came up. I have since then replaced the rear O2 sensor and the two latter codes went away. Everything checks out, and I got a code 9 on my cylinder balance test! WHOOHOO! I've just never noticed the code 511 before and was just wondering if it was anything to worry about.
 

Chrisssssssss

New Member
Joined
Aug 7, 2001
Messages
338
Reaction score
0
Location
vancouver, BC, canada
Not to worry about the 511. That means that you have a chip installed (A la LPM) and it is not getting the correct responce from your stock computer (A la LPM). That's the 411 about the 511. I get it too with my superchip, but it does not trigger the CE light.
 
Back
Top