Space Coast Speed Shop --- SHO Meet JUNE 27th

[blaze2tires]

As many of you have already found out, Chris is no longer a part of Space Coast Speed Shop. Everyone involved is happy about the decision and we are all still friends and in contact with each other. We have moved our location and will continue to provide excellent service and will still be incorporating as much SHO involvement as we have in the past.

Space Coast Speed Shop would like to host their first SHO Meet. However, in order to try to include as many people as possible, we would like to get everyone's input on the best date and time to have the event. Please post and discuss any ideas and opinions on your preference; we will try to accommodate as many people as possible. Also, if you need any work done during the meet, please contact Jeremie or myself ASAP to allow for scheduling.

Thank you for your continued support and we hope to hear from you soon!

 

[SHOtime2511]

sundays work best for me.

 

[CWhalenSHO]

Sunday's would work for me as well. I'd just drive down on Saturday and crash in a hotel room.

 

[32MTX]

weekends are good

let me know if anyone wants anything done, and what it is, I might help out if its something I'm handy at. or if you need any parts

anyone down for a SHO swap meet?

any of u guys have any kind of a stash of parts? or need stuff

 

[CWhalenSHO]

I need my rod bearings done and have my Hard Button ETAC installed....but then again, what would be the point if my A/C isn't working. 32MTX, do you think you can help out with that?

I do have a few parts I can bring for the swap meet....Zex Kit, bored out throttle body, etc.

Come on FL guys, let's get this meet going!!!

Tony (SHO_ROLLER_2) you're going! Whether you like it or not :laugh_ti:

 

[blaze2tires]

I was thinking 27th of June (it's a sunday). How does that sound?

 

[CWhalenSHO]

I was thinking 27th of June (it's a sunday). How does that sound?

Sounds good to me....

Come on FL guys. If I can make the 4 hour trip, I know a lot of you can.

K-Dawg, you're right down the road from Space Coast and we haven't heard a peep from you yet

 

[chrism3784]

I can prob make it, but no guarentees. As always I work at a place thats busiest on sundays. Always made it hard for me.

 

[cflguy2005]

If the 27th is definite, I could put in for time off.

 

[SHO_ROLLER_2]

I need my rod bearings done and have my Hard Button ETAC installed....but then again, what would be the point if my A/C isn't working. 32MTX, do you think you can help out with that?

I do have a few parts I can bring for the swap meet....Zex Kit, bored out throttle body, etc.

Come on FL guys, let's get this meet going!!!

Tony (SHO_ROLLER_2) you're going! Whether you like it or not :laugh_ti:

I'll be in! With my new job, I'm off weekends!!:woo-hoo:

Need my oil pan gasket done.


Oh, and CWhalenSHOs ZEX kit too. That ***** ain't gonna use it! He's afraid of his diff pin!!

 

[SHOtime2511]

27th is good with me.

 

[blaze2tires]

June 27th will be the day of the meet. Pm me with any questions.

 

[CWhalenSHO]

I'll be in! With my new job, I'm off weekends!!:woo-hoo:

Need my oil pan gasket done.


Oh, and CWhalenSHOs ZEX kit too. That ***** ain't gonna use it! He's afraid of his diff pin!!

Might as well have the rod bearings done while the oil pan is dropped to replace the oil pan gasket, Tony.

Yes I am afraid to have my trans grenade itself.

Especially after your previous post about how your first trans went at 190K and I'm pushing 194K on my trans without any records of it ever being replaced...

Now if I had a reinforced trans like you....Zex Kit FTW!!!

 

[CWhalenSHO]

I think we're going to need directions to the new shop. I'll figure out what hotel to stay at based on where the new place is located.

 

[32MTX]

I can do your EATC no problem! I'll bring my elecrtic driver and have it changed in short order if I have a clear head lol..... I'm an expert at that prodcure, I do it a lot to test out ones I sell. I can almost do it blind folded.

rod bearings would depend on the other guys, it is a time consuming job, especially on the back. I've done them before and its not rocket science though. A lot of it depends on if your car is rusty junk and the exhaust comes out easily...... My car I can have it off in about 2 minutes with air tools.... other ones with bolts that snap off or something turn into a real adventure!

its up to the guys hosting the meet how serious of stuff they will want to do. I'm down for helping with just about anything though, and have the tools to do it.

be cool if you all make the drive from there and meet up with some new guys. Almost every meet up I've been to is these two guys, SuperchargedSHO, Kelvin and Brian all the time, not that they are bad folks to be around.


and June 27th sounds good so far, thanks for the month advance.

 

[blaze2tires]

The address is 7717 Ellis Rd Unit F1 West Melbourne FL 32904.
Click Here for Map

 

[K-Dawg]

As of now, I can do the 27th.

 

[CWhalenSHO]

Is anyone driving in Saturday afternoon? If so, I think it would be cool if we could all stay at the same hotel like we did for the Gainesville Track Day.

 

[SHOtime2511]

Im only about 30min away for the shop,so Ill be coming down sunday.

 

[32MTX]

looks like a good turn out!

SuperchargedSHO, u comming?