SHO Source Y-Pipes and Headers Group Buy

[LOUDSHO92]

We are finally going to be bringing out the SHO Source y-pipes and headers.

This is what we will be offering:

MTX Equal Length y-pipes based on the SHO Shop design but we will have the design tweaked for better fitment.

Found here:
MTX Y-Pipe

New ATX Equal Length y-pipes.

Found here:
ATX Y-Pipe

Both will be $200 catless and $300 catted

MTX/ATX Long Tube Headers. We will be working on a universal design for both ATX and MTX. If this is not achieved we will be doing a separate design for both.

The headers will be $500 per set.

The headers will work with the catless y-pipes but might take some work for catted or a custom y-pipe. We will have to find out.

We will also offer ceramic coating at $200 per set.

Let me know what you are interested in and ATX or MTX.

Headers ad is up: Headers

We will need 15 paid orders of each item (headers and y-pipes) to move ahead.

Interested:
MTX Y-pipe:
1. Grantorinslo (catted) (paid)
2. syP (catless) (paid)
3. yzStud (catless)
4. RiceeatingSHO (catless)
5. gurucomputers (catless) (paid)
6. pitaSHO (catless) (paid)
7. 38SHO (catless) (paid)
8. K-Dawg (catted) (paid)
9. ST 2 SHO (catted)
10. CWhalenSHO (catless) (paid)
11. SHOtgun1 (catted)
12. Ocnaj (catless) (paid)
13. cmz829 (catted)
14. Pure Stock (catted)
15. GeneSHO (catted) (paid)
16. expy916 (catted) (paid)
17. 1993MTXSHO (catted) (paid)
18. sho'noffmtx (catless) (paid)
19. jbserra (catted) (paid)
20.

ATX Y-pipe:
1. M3rcury88 (catted) ?
2. Call Me Crazy (catted) ?
3. average sho (cattless) (paid)
4. LeddZepp868 (?)
5. snkmug (catted)
6. Call_Me_crazy (catted)
7. thinkingstrings (cattless)
8. guitar (cattless)
9. James (paid)
10. CallitasICit (catted) (paid)

Headers:
1. syP (coated)
2. zorlack (plain?)
3. rocket455 (plain)
4.

We will update you guys on information as it comes out.

 

[syP]

Interested in catless Y-pipe and the Headers.

 

[yzstud]

put me down for mtx catless y-pipe

 

[SHOmethewayhome]

interested in catted y pipe. interested enough to pretty much all but buy a magnaflow. what kind of time frame are we talking about for a SHO source y pipe after you get your 15 orders?

:urock::thankyou:

 

[Call_Me_crazy]

Specs on the ATX cated y pipe? pipe dia. and brand of cats? I have cash burning holes in my pockets!

 

[SHOtime2511]

whats the word on getting something built with a better collector?

 

[RiceeatingSHO]

I will definately do a catted Y-pipe for an MTX.

 

[M3rcury88]

Might be interested in Catted ATX Y-Pipe.

 

[NWGRN94MTX]

Might be interested in Catted ATX Y-Pipe.

Sorry to be so blunt, but we need hard numbers. "Might" is not a choice. Please serious people only. Really all we need to know right now is yes, make is group buy happen put my name on the list. When we get enough "serious"people, we will ask for serious funds to make it happen.

Anybody who has been around for awhile knows what the SHO Shop headers and "Y"-pipes are. Matt will answer questions that are not redundant.

So, what we need to see is, "put me down for a set of headers, ceramic coated." or "put me down for a ATX "Y"-pipe, catless"

 

[zorlack]

put me down for mtx header

 

[RiceeatingSHO]

Do you need a deposit? Because if that's what it takes I'm in.

Put me down for a MTX Catless Y-pipe

 

[ras2433]

What will shipping be like?
Location: Michigan

 

[RiceeatingSHO]

What will shipping be like?
Location: Michigan

Think 30 lb range for the Y-pipe.

 

[SHOmethewayhome]

put me down for a MTX catted Y pipe.

 

[1993MTXSHO]

oh damn, worst possible time, I just dumped so much into my cars for maintance. I really want a set of long tubes for my mtx, but can't at this point in time unless some of my parts sell. You have any pics of the long tubes with some specs on primary and collector sizes as well?

I just realized this but, are these just copys of the shoshop headers?

 

[LOUDSHO92]

whats the word on getting something built with a better collector?

I highly doubt we will be able to do anything like NotSoSlowSHO's y-pipe as that type of design doesn't allow for the cat or allows for ease of mas production. I can see about it but I highly doubt it.

Do you need a deposit? Because if that's what it takes I'm in.

Put me down for a MTX Catless Y-pipe

We will ask for deposits once we have enough interest. If you want to make a deposit once an ad is up you can.

What will shipping be like?
Location: Michigan

Around $25 give or take.

oh damn, worst possible time, I just dumped so much into my cars for maintance. I really want a set of long tubes for my mtx, but can't at this point in time unless some of my parts sell. You have any pics of the long tubes with some specs on primary and collector sizes as well?

I just realized this but, are these just copys of the shoshop headers?

Yes they will basically be SHO Shop headers but hopefully modified for a universal fit. If not the MTX will be the same and the ATX will be fit for the ATX.

If there is not enough ATX header demand we wont even attempt it.

 

[LOUDSHO92]

interested in catted y pipe. interested enough to pretty much all but buy a magnaflow. what kind of time frame are we talking about for a SHO source y pipe after you get your 15 orders?

:urock::thankyou:

Once we collect the fund it will be around 3-4days to get the test parts made and maybe a couple more days for tooling. From there it will be around 1-2weeks for production.

Specs on the ATX cated y pipe? pipe dia. and brand of cats? I have cash burning holes in my pockets!

2.25" like MTX and Magnaflow cats.

 

[gurucomputers]

Count me in for 1 MTX Catless Y-Pipe

 

[pitaSHO]

Put me down for one catless MTX y-pipe.

 

[RiceeatingSHO]

Change mine to Catless, sorry. Must have been thinking different than my fingers.