NEp8ntballer
cyber ninja
there are a number of responses I could make but the common theme to all of them is you being too stupid to pick up on the sarcasm or the joke.
SHO Source Turbo Kit
- Thread starter shopartsnw
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SHOstopper1992
Whoops
To all the guys over at SHOsource, Thanks so much!
Hopefully one day I will have a running SHO to put this kit on!
Hopefully one day I will have a running SHO to put this kit on!
SHOmethewayhome
BAD ROLE MODEL
Patiently waiting for pics of the kit pieces.
congrats for what appears to be the end of a very long process.
I don't think a lot of people realize this isn't a full time job for you guys.
congrats for what appears to be the end of a very long process.
I don't think a lot of people realize this isn't a full time job for you guys.
Bob Gervais
Wut?
^this, or the complainers are too ignorant to care, and most likely not going to buy the kit anyway.
SHOmethewayhome
BAD ROLE MODEL
Bob said **** the rent, he's buying me a kit.
send it to me C/O pookie.
kthx
send it to me C/O pookie.
kthx
Neither of you two 'jokesters' gave a thanks, but have been plenty free in giving of your 'humor'. Just sayin'.
Very nice. I was wondering where the placement was, after I saw the pic of the stock airbox in place. Nice and stealthy, very cool.
For clarification, Option #3 adds oil and water lines and a catch can, and cost an additional $1300? What am I missing?
For clarification, Option #3 adds oil and water lines and a catch can, and cost an additional $1300? What am I missing?
Bob Gervais
Wut?
**** the rent, child support, and health insurance.
On its way, along wit demrimz.
pitaSHO
Why do I do this to myself?
Hey, Matt. Time to change your sig. Now with more turbo. 
Chris K.
BTW, NICE JOB!!!!!!!!!!!
Chris K.
BTW, NICE JOB!!!!!!!!!!!
somedude_001
SHO Member
I have a road course event end of next month. What kind of turn around time can I expect with this kit? I am pacing in my house right now because i am not going to tell my roommate about it. I just want to show up with the kit installed. I am so going to waste my clutch with this
Edit: once again I think my Sig applys here
Edit: once again I think my Sig applys here
luigisho
SHO Member
Hmmm. I'm going to have to figure out how to pass visual state inspection. We don't currently have emissions testing, but alot of places will look under the car.
St Louis SHO
Rollin' coal
Good job guys. Those pipes should fit just fine on a gen 3 subframe. Price is right too.
Well i have to give it to you guys. I love the fact of you doing the kit in 3 stages. I see lots of pipes flying off the shelf in the future. Ill probably be one of those people as long as the kit stays on the market for awhile. Could we get more info on the turbo?
It says t3/t4 with custom internals. Is It a BB turbo? Whats the size?
It says t3/t4 with custom internals. Is It a BB turbo? Whats the size?
SHOtime2511
CGP
Under 4K for the option 2,good deal right there.
StAnGbAnGeR
NavistarEngTec
Very nice. This kits with all of the options was WELL worth the wait. Thanks again SHOSOURCE!
Ther eis more to it. There is the MAF, MAF ******, catch can, lots of fittings (the turbo has 6 water ones alone), stainless oil lines, hoses, air filter and other hardware. I included things like body fasteners for when you remove the bumper and caps for hoses.
There is a lot of welding for the piping as well as the coating. My guess is around 1-2 months. The rest is mostly off the shelf.
Oh they will have to really look to find it.
I am not sure what you mean by BB turbo. Size of what?
Last edited:
SHOtime2511
CGP
BB=ball bearing
I'm sure a lot of people will want to know the A/R size of the turbo.
I'm sure a lot of people will want to know the A/R size of the turbo.
BB = Ball bearing
Yes, specs on turbo are a must.
housing A/R, comp wheel and turbine wheel sizes.
I assume the TiAl comes with a .6 Bar spring? And does the full kit include the lines to water cool the WG?
Good stuff SHOSOURCE.
Can't wait to check it out in person at the Convention! Any plans to do a higher boost dyno? By my calculations, you should see near 340whp @ 12psi.
Yes, specs on turbo are a must.
housing A/R, comp wheel and turbine wheel sizes.
I assume the TiAl comes with a .6 Bar spring? And does the full kit include the lines to water cool the WG?
Good stuff SHOSOURCE.
Can't wait to check it out in person at the Convention! Any plans to do a higher boost dyno? By my calculations, you should see near 340whp @ 12psi.
Similar threads
