shifting problems

[Anonymous]

Just had my tranny rebuild on my 95 ATX and now every time I try to accelerate I strains like it don't want to go nowhere and not shifting properly into 2nd and 3rd resulting in hard shifts and high revs but no power ...I was told it could be the solenoid for the tranny

 

[shomike220]

Sound like it could be slipping. Id be talking to the guy that rebuilt it.

 

[Anonymous]

Sound like it could be slipping. Id be talking to the guy that rebuilt it.

It bucks every time it tries to go into gear , it don't actually slip llike a bad clutch more like reving high rpms

 

[Mr Anonymous]

Check to make sure the MLP, TSS and VSS are all plugged in completely.

 

[shomike220]

Post a video if all else fails

 

[Anonymous]

Post a video if all else fails

I will try and post a video Immediately

 

[Anonymous]

I will try and post one up ASAP ...

 

[rubydist]

the first thing to do is pull codes to see if the pcm is complaining about any of that yet or not. with your description, I expect there to be codes.

 

[Anonymous]

the first thing to do is pull codes to see if the pcm is complaining about any of that yet or not. with your description, I expect there to be codes.

I gotta code reader the original Ford one too but I forgot where I put it at ...isn't there a lil trick with bridging a paper clip?