SCT BDX general error 110D8

[citysmoke]

Just got around to installing my AO tune and got this general error code from the BDX 110D8 . Any help with this would be appreciated.

 

[FiveLeeter918]

Make sure that all interior and exterior electronics are off or unplugged. AC, headlights, radio, radar detectors, sub amps, everything. If the SCT detects a voltage drop of more than 0.2v during the process it will abort to prevent bricking the pcm.

 

[citysmoke]

Thank you I will go back out there and make sure all are off and try again(fingers crossed).

 

[FiveLeeter918]

if the car has been sitting for a bit prior to tuning, I've also found that starting the car and letting it idle for a few minutes, then turning it off and immediately tuning helps as well.

 

[Zpak]

I have to pull the extra fuse for my Fuel IT before flashing or I’ll get that error every time.

 

[citysmoke]

My dash cam kept turning on during the process causing the voltage drop . Car is now up and running thanks again

 

[FiveLeeter918]

My dash cam kept turning on during the process causing the voltage drop . Car is now up and running thanks again

glad to help!