removing trans side cover (AXOD-SHO)

[nc89sho]

two questions.. forgive my ignorance, i'm really a 5-speed guy.

1)is the gasket for the side cover re-usable?

2)do you have to remove the transmission support brace that runns in front of this cover or can you unbolt it and slide it out the top or bottom.?

 

[rlw001]

You will need to remove the support brace. I am sure that you have enough room to pull the cover with out dropping the subframe a bit.

? Why are you pulling the cover?

I would not reuse that gasket.

 

[nc89sho]

thinking about going after the EPC to turn up the line pressure in the tranny. just debating dificulty vs. benefit.

were would i get a new gasket. i'm thinking it's a ford only thing.

 

[Axianator]

nc89 - Fel-Pro should also have a sidepan gasket set available. Unfortunately, I don't have a part number handy ..

Are you referring the pressure riser mod that I listed in the other thread or are you eluding to modifying the EPC solenoid itself?

 

[JTSHO]

Ut oh...I was thinking about trying to do this too Terry...SHO-BOOM here we come!

 

[nc89sho]

was talking about the screw you can use to set the psi via the EPC it's self. but i would still like you to reply to my other post.. not sure wich route i will go.